Happy HCS2-1201-30, Руководство по обслуживанию

Страница: 178 / 196

1 70
6-2-4 Trouble shooting (Off-registration of pattern)
Trouble Factor Cause of trouble and measure Page
Off-registration
Mechanical
1. Does frame move smoothly?
of pattern 1-1 Avoid curling of thread and cloth.
1-2 Reinstall of outer cover in case of touch with outer cover. 2-1
1-3 Adjust with no clearance between Arm and Connecting plate B.
2. Is bound of frame base too big?
(6-1)
2-1 Fix frame base between bearing and base without gap.
3. Is carriage belt tension proper?
3-7-1
3-1 Adjust all belts as specified. 3-7-3
4. No loosening of screws on carriage drive?
4-1 Check screw. If loosened, tighten firmly.
5. No lints or dust around idler pulley on carriage?
5-1 Clean
6. No damage in carriage belt?
3-7-2
6-1 If damaged, replace. 3-7-4
7. No backlash of back and forth in moving head?
7-1 Adjust positioning roller shaft to remove backlash back and forth.
3-3-2
8. Is height of pressure foot proper?
8-1 Adjust as specified.
3-2-12
9. No problem in motion of pulse motor?
9-1 Check wiring. If screw got loosened, tighten more.
9-2 After 9-1, still problem, then replace.
10. No problem in motion of CONT board?
10-1 Check wiring. If screw got loosened, tighten more.
10-2 After 10-1, still problem, then replace.
11. Does't other frame than Happy's genuine one used?
11-1 If frame is too heavy, don't use it.
11-2 If setting is not proper, set it so as not to move.
12. No problem in LCD-CE board?
12-1 Try to initialize.
4-4
12-2 Replace of LCD-CE board.
13. Is number of revolution proper?
13-1 Make automatic speed setting.
4-4-5
14. Not affected by noise?
14-1 Don't use the machine near where noise is generated.
Operator 1. Is setting of frame correct? (6-3) (7-6)
1-1 Frame should be put in positioning hole on tubular frame.
1-2 Set so as for screw not to loosen.
( ) ---Reference instruction book