Happy HCS2-1201-30, Руководство по обслуживанию

Страница: 149 / 196

1 51
4-5-4-5 Setup Machine setting
<NOTE> ( *: Setting is for each indivisual machine, so prohibit to change setting. When you need to chage it,
please contact us in advance)
( $ : Setting is different for each model type. Please check before changing data)
( # : Setting is depending on options installed. Please check before changing data)
Contents
＊
1 Machine Type : HCS2
＊
2 Max Needle Number : 12 (1-15) : Number of Needle
＊
3 Max Head Number : 1 (1-30) : Number of Head
＊
4 Machine Max Speed : 1000 (500-2000) : Maximum rotation
＊
5 Machine Max Area X : 290 (1-1000) : Maximum embroidery area at X axis
＊
6 Machine Max Area Y : 290 (1-1000.) : Maximum embroidery area at Y axis
＊
7 X Position Sensor : 0 (0-12) : Number of position sensor at X axis
＊
8 Y Position Sensor : 0 (0-12) : Number of position sensor at Y axis
# 9 LED Needle Pointer : No : Use of LED Pointer Yes or No
＊
10 Safety Sensor : No. : Use of safety sensor ( rear )Yes or No
＊
11 N.Safety Sensor : No. : Use of safety sensor (front) Yes or No
＊
12 Clip Holder Device
：
No : Use of Clip holder device YES or NO
＊
13 Borer Device : No. : Use of Borer device Yes or No
$14 Cutter Unit Type : ***** (PulseMtr, Solenoid) : Thread cutting unit type
15 X Start Base Angle : 50 (20-90) : Starting angle of frame movement on X axis
16 Y Start Base Angle : 50 (20-90) : Starting angle of frame movement on Y axis
17 X Start Angle(CAP)
：
50 (20-90) Starting angle of frame movement on X axis for cap frame
18 Y Start Angle(CAP)
：
50 (20-90) Starting angle of frame movement on Y axis for cap frame
＊
19 Color Change Speed
：
Slow1 (Normal / Slow1 ~ Slow4) Speed of needle bar change
＊
20 Brush Data [*0.1mm]
：
200 (0-250)
Distance of thread brush (mm) after thread cut
(1:0.1mm , 200:20.0mm
…
250:25.0mm)
＊
21 Clip Close Timing
：
0 (0-1000) Close timing of Clip when Thread trim (ms)
Set to 200 when the Clip holder device is Yes.
＊
22 Border Overlap
：
0 (0-10) Overlap of between heads for border frame
＊
23 Trace Needle No.
：
1 (1-15) Needle Number for Trace
＊
24 Device Com. Speed
：
19200bps (2400-115200) Communication speed for Sequin device and
Cording device
＊
25 Sequin Dev. Left
：
No Use of left side Sequin device Yes or No
＊
26 Sequin Dev. Right
：
No Use of right side Sequin device Yes or No
＊
27 Sequin Dev. Type
：
Other (Happy) Type of Sequin device
＊
28 Number of 3-Needle
：
0 (0-15) Needle number of 3-Needle device