Hanwha Techwin Wisenet XRN-6410DB4, Руководство пользователя

Страница: 51 / 118

English _51
record Setup
You can set the resolution and number of recordings for each channel when an event occurs or during a normal
recording.
You can check frame rates and data transfer amount of Full Frame and Key Frame recordings for each channel,
and set the transfer limit for recordings.
Setup > record > record Setup
• Apply to CH : If you select < Apply to cH >, “ Apply to cH ” confirmation window will appear.
After selecting channels that the settings will be applied to, click on < oK > to apply them to the selected
channels.
• : Displays the camera of the corresponding channel as a list or a thumbnail.
• Camera name : Display the camera name.
• IP address : Display the IP address of a camera.
• Normal recording, Event : Configures Normal recording and Event recording.
- FULL : Records all frames fed by the camera.
- I-frame : Records only key frames fed by the camera. It depends on the camera's settings.
- OFF : No recording is made.
• Frame
- FULL : Shows the amount of data for all the scene recordings.
- I-frame : Shows the amount of data for the main scene recordings.
• Limit : Set the amount of data allowed for input for each channel.
• Event : When an event occurs, you can set which point you will start or stop recording.
- Pre : When an event occurs, recording will be started regardless of the time set.
If you set it to five seconds, recording will start at five seconds before an event occurs.
- Post : When an event occurs, recording will continue after the time set.
If you set it to five seconds, recording will continue for a further five seconds after an event is finished.
• Audio : Specify whether to record the sound received from the camera or not.
` If a channel's data transfer exceeds defined allowed limit, then it may affect to other channels, and may force switching to
< I-frame > recording even when the channel is configured to < FULL > recording mode. For Key Frame recording channels, the
icon for limited recording appears on the live screen's top side.
But if the sum of the limits is below the max limit, you can still receive the entire frames despite exceeding the permitted bitrates
for each channel.
` A channel displayed in yellow indicates that the recorded data is not being transferred from the camera and that the recording is
being performed temporarily using another profile on the camera.
Check the channel information to see the applied profile to the channel listed in yellow.
A channel displayed in orange indicates that the amount of inputted data is greater than the permitted data amount. In this case,
it is impossible to record all of the incoming frames. Instead, only part of the frames (1 or 2 frames per second) can be recorded.
To resolve this issue, you must set the permitted data amount to be greater than the amount of inputted data.
Refer to the " Live > Live screen mode > Check the camera status " page in the Table of Contents.
record option
When the HDD capacity is full, you can set whether to stop recording or start overwriting.
Setup > record > record option
• Enable dual recording : Check it if you want to record the recording profile and remote profile simultaneously.
"Enable dual recording" can be applied as a profile appropriate for the split mode during the playback.
• Disk end mode : Select the recording method when the hard disk storage capacity is full.
- Overwrite : If the HDD is full, this will overwrite the existing data and keep recording.
- Stop : If the HDD is full, this will stop recording automatically.
• Disk End Beep : If you select < Stop > for the HDD Repeat Recording mode, this button will be active. Specify the
use of beep when the HDD recording ends.
If you check it, the beep will sound on the disk full and the recording stops.
• Auto Delete : If you check this option, the period list box is active, and you can set the automatic deletion period.
Specify the deletion period to delete any earlier data than the specified date. However, you can search for data
from the current time to the selected date.
` If you select < Overwrite > for the HDD Repeat Recording, the button is enabled.
` You can select a channel and set a different recording duration for each channel.
• Apply to CH : If you select < Apply to cH >, “ Apply to cH ” confirmation window will appear.
After selecting channels that the settings will be applied to, click on < oK > to apply them to the selected
channels.
` If you press < Auto Delete > when you have completed your settings, all the existing data earlier than the specified period will be
deleted automatically. If you need to keep your old data, export it first.
●
SetuP