manualshive.com logo in svg

Hanwha Techwin Wisenet XRN-6410DB4, Руководство пользователя

Поделиться
Скачать
Hanwha Techwin Wisenet XRN-6410DB4 Скачать руководство пользователя страница 20

20_

 live

live

check the camera Status

You can check the status of all cameras connected to the recorder.
To check the camera status, click < 

 > at the bottom of the screen.

live Status 

Select <

live

> in the <

Status

> menu to check the transmitted data from a network camera connected to each 

channel.

•  Model : Displays the model name of camera connected to each channel.
•  Status : Shows the connection status of camera set to each channel.
•  IP Address : Displays the IP address of a camera set to each channel.
•  Codec : Displays the live profile codec information for a camera set to each channel.
•  Resolution : Displays the live profile resolution of a camera set to each channel.
•  Frame rate : Displays the live profile transmission rate for a camera set to each channel.

record Status

If you select <

record

> in the <

Status

> menu, you can check the profile, record type, frame rate (Input/Record), 

and bit rate (Limit/Input/Record) for each channel.

•  Total Bitrate (Record/Max) : Record bitrate shows the amount of actual data recording while Total bitrate shows 

the maximum data transfer allowed by the Recorder.

•  View All : Displays information for all channels or channel groups. This function is only available for products that 

support distributed recording.

•  Current : Shows the recording status information of currently transferred data.
•  Max : Shows recording information of the most biggest recording data out of configured standard and event 

recordings. 

• 

 : Reloads the recording information. 

•  Profile : Shows the video profile configured to each channel.
•  Record Type : View the record type according to general or event recording.
•  Frame rate (fps) : Show the input/record frames per second for each channel.
•  Bitrate (bps)

-  Limit / Input / Record : Shows the amount of limit/input/recording data for each channel.
-  Receive/Limit : Shows the data ratio of actual data transferred from the camera and allowed maximum defined 

by user.

•  Record setup : You can set detailed recording settings in the Recording Settings window. 

For more details, refer to the "

Setup 

>

 Setting the recording 

>

 record Setup

" page in the Table of Contents.

 

`

If an error occurs during recording, the channel's profile column turns yellow.

This profile error indicates that when a recording profile cannot be used to receive video from camera, an alternative profile is 

used to record the video. When the recording profile resumes, the camera video can record by using the set recording profile.

 

`

If Recorder exceeds the recording limit, only the key frame will be recorded. In that case, a restricted recording popup and an icon 

will appear. The restricted recording popup appears only once. If you change the camera setup and record setup, the restricted 

recording popup may appear once more to confirm the status.

If you don't want to see it again, then check Do not show this again in the popup.

For the maximum allowed number of recoding, refer to the "

Setup

 > 

Setting the Recording

 > 

Record Setup

" page in the Table 

of Contents.

 

`

For dual recording, the bit rate is shown as the sum of Main Stream and Sub Stream. 

However, the <

Enable dual recording

> box in the "

Record

 > 

Record Option

" menu must be checked. 

The recording profile and remote profile can be set in the "

Camera

 > 

Profile

" menu.

Содержание Wisenet XRN-6410DB4























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды