Hanwha Techwin Wisenet XRN-6410DB4, Руководство пользователя

Страница: 62 / 118

62_
setup
setup
display position settings
Some monitors many not display information (camera name, icon, time information, etc.) about the Recording,
depending on the condition. Then, you can change the display position of the data.
1. From the monitor setup menu, select < display Position Setup >.
2. Using < > button to adjust the screen that is cut off.
3. Press < oK >.
` This product only supports 30Hz at 4K resolution.
expansion monitor settings
This function is only available for products that support the use of an extended monitor.
1. Select < expand > for video display and click < Setup >. You can change the layout of the extended monitor.
2. Select split mode in the layout mode.
3. Select as many channels on the channel table as the number of channels selected in layout mode, and you can
view the applicable screens on the monitor.
` If the newly selected resolution does not fit with the monitor, the display won’t function properly. In this case, wait until the native
resolution is restored and then switch to another resolution of your choice.
` The profile used in the live output of the expanded monitor uses a remote profile. If the user changes the remote profile, the video
output of the expanded monitor may be affected.
` If the monitor is in clone mode, you can specify up to the split mode supported by the recorder. When the monitor is set to
expanded mode, you can assign up to 16-split of the secondary monitor.