H3C XE 200/2000 IP, Руководство по эксплуатации

Страница: 467 / 514

Operation Manual – Call Services
H3C XE 200/2000 IP PBX
Chapter 23 Group Notification Service
23-3
3) The notification deliverer picks up the phone, dials the notification-delivering
access code, and listens to the music on hold until the receivers pick up their
phones.
4) As any receiver picks up the phone, the music on hold stops and the deliverer can
start sending the notification. Any phone set not picked up keeps ringing.
5) If a subscriber does not pick up the phone, the phone rings again after the
predefined interval, provided that the notification is still being played. The
subscriber can pick up the phone and receive the notification. The phone rings up
to 10 times if it is not picked up.
6) If a subscriber hangs up when listening to the notification, the XE IP PBX will not
send invitation to that subscriber again because it considers the subscriber has
completed receiving the notification.
7) When the notification is being played, members in the receiver group can hear the
notification by dialing the corresponding access code. However, once the
notification sending is completed, receivers cannot listen to it again by dialing the
access code..
23.2 Group Notification Service Configuration
23.2.1 Configuring Notification Receiver Group
Table 23-1 Configure a notification receiver group
Operation Command Description
Enter system view. system-view —
Enter LS view. location-server —
Enter LS-SRV view. service —
Enter group notification view. group-notify —
Enter a group view, or create a
group and enter its group view
if the specified group does not
exist.
group-config group-id Required
Add a member to the group. member number Required