H3C XE 200/2000 IP, Руководство по эксплуатации

Страница: 266 / 514

Operation Manual – System Management
H3C XE 200/2000 IP PBX Chapter 2 Terminal Service and User
Interface Configuration
2-2
z
ui 1 for the AUX.
z
ui 2 to ui 6 for the VTY.
II. Relative numbering
Relative numbers take the form of user interface type + number. They are used by the
user interfaces of the same type to identify each other. When multiple user interface
types are involved, however, relative numbers cannot be used.
The following are the relative numbers for the user interfaces:
z
con 0 for the console.
z
aux 0 for the AUX.
z
VTY 0 for the first VTY, VTY 1 for the second VTY, and so on.
2.2 Console and AUX Terminal Service Configuration
The console port is the primary configuration interface, through which you can enter the
configuration interface for initial configuration of the XE IP PBX.
The AUX port functions as the backup and remote services of the console port to
provide almost the same terminal services as the console port.
Their user interface configurations include:
z
Configuring attributes of the asynchronous interface
z
Configuring attributes of the terminal
z
Configuring user authentication
2.2.1 Entering User Interface View
In system view, enter the view of a user interface by using its name and relative number
or by its absolute number only. The absolute numbers of the console and AUX ports are
ui 0 and ui 1 respectively.
Perform the following configuration in system view.
Table 2-1 Enter user interface view
Operation Command
Enter the view of the console user interface with its
name and relative number
user-interface console 0
Enter the view of the console user interface with its
absolute number
user-interface ui 0
Enter the view of the AUX user interface with its
name and relative number
user-interface aux 0
Enter the view of the AUX user interface with its
absolute number on the XE 200
user-interface ui 1