H3C XE 200/2000 IP, Руководство по эксплуатации

Страница: 116 / 514

Operation Manual – Location Server Configuration
H3C XE 200/2000 IP PBX
Chapter 1 Location Server Configuration
1-32
III. Displaying the information about office groups configured on an LS
Perform the following configuration in any view.
Table 1-54 Display the information about office groups configured on an LS
Operation Command
Display the information about office
groups configured on an LS display location-server office-group
{ all | officegroup-id | list }
IV. Displaying the statistics about the LS
Run the location-server statistics command in any view, and run the reset
location-server statistics command in user view.
Table 1-55 Display the statistics about the LS
Operation Command
Display the statistics about the LS display location-server statistics
Delete the statistics about the LS reset location-server statistics
V. Configuring the debugging level of the LS
Perform the following configuration in user view.
Table 1-56 Configure the debugging level of an LS
Operation Command
Configure the debugging level of an LS
debugging location-server { call |
heartbeat | register } level level
Restore the default debugging level
undo debugging location-server
{ call | heartbeat | register }
By default, the debugging level of the LS is 3.
VI. Displaying the debugging level of the LS
Perform the following configuration in any view.
Table 1-57 Display the debugging level of the LS
Operation Command
Display the debugging level of the LS display debugging location-server