H3C XE 200/2000 IP, Руководство по эксплуатации

Страница: 325 / 514

Operation Manual – System Management
H3C XE 200/2000 IP PBX
Chapter 7 SNMP Configuration
7-5
# Set the public community to read-only privilege.
[XE] snmp-agent community read public
# Set the private community to read/write privilege.
[XE] snmp-agent community write private
7.2.4 Setting/Deleting an SNMP Group
Use the configuration to set or delete an SNMP group.
Perform the following configuration in system view.
Table 7-5 Set/delete an SNMP group.
Operation Command
Set an SNMP group.
snmp-agent group { v1 | v2c } group-name [ read
read-view ] [ write write-view ] [ notify-view notify-view ]
snmp-agent group v3 group-name [ authentication |
privacy ] [ read read-view ] [ write write-view ]
[ notify-view notify-view ]
Delete an SNMP group.
undo snmp-agent group { v1 | v2c } group-name
undo snmp-agent group v3 group-name
[ authentication | privacy ]
7.2.5 Adding/Deleting a User
Use the configuration to add or delete a user for an SNMP group.
Perform the following configuration in system view.
Table 7-6 Add/delete a user for an SNMP group.
Operation Command
Add a new user to an SNMP group.
snmp-agent usm-user { v1 | v2c }
user-name group-name
[ [ authentication-mode { md5 | sha }
auth-password ] [ privacy-mode des56
priv-password ] ]
Delete a user from an SNMP group.
undo snmp-agent user { v1 | v2c }
user-name group-name
undo snmp-agent user v3 user-name
group-name [ engineid engine-id | local ]
# Add the user “John” to the SNMP group “Johngroup”, with security level as
authentication required, the specified authentication protocol as “HMAC-MD5-96”, and
the authentication password as “hello”.