68
•
Power on the router after powering it off, which is also called hard reboot or cold start. Powering
off a running router causes data loss and hardware damages, and therefore is not
recommended.
If you execute the
reboot
command without specifying the
slo
t
keyword, the command reboots
the router, including the active MPU, standby MPU, the switching fabric modules, and the service
modules.
If the main startup configuration file does not exist, do not use the
reboot
command to reboot the
router or the active MPU. In this case, you should specify the main startup configuration file first, and
then reboot the active MPU.
The precision of the rebooting timer is 1 minute. One minute before the rebooting time, the router
prompts "REBOOT IN ONE MINUTE" and reboots in one minute.
If you are performing file operations when the router is to be rebooted, the system does not execute
the
reboot
command for security.
To reboot the router immediately:
Task Command
Remarks
Reboot the router or the module in
the specified slot immediately.
reboot
[
slot
slot-number
]
Required
Available in user view
To enable the scheduled reboot function:
Task Command
Remarks
Enable the scheduled reboot
function and specify a specific
reboot time and date.
schedule reboot at
hh:mm
[
date
]
Use either command
The scheduled reboot function is
disabled by default.
Available in user view
Enable the scheduled reboot
function and specify a reboot
waiting time.
schedule reboot delay
{
hh:mm
|
mm
}
