58
Starting to get the main application file--cfa0:/main.bin!..................
......................................................
The main application file is self-decompressing
..........................................................................
..........................................................................
.......
.......
Done!
System is starting.....
Starting application at 0x00010000 ...
Mainboard 0 is master.
User interface con0 is available.
Press ENTER to get started.
Press
Enter
, and the following prompt appears:
<H3C>
You can now configure the router.
Logging in to the router through Telnet
1.
After powering on the router, log in to the router through the console port. Enable the Telnet
function on the router and set user privileges.
2.
Connect the PC to the management Ethernet interface on the router and specify an IP address
for the interface.
3.
Specify an IP address for the PC, make sure the PC and the interface are in the same network
segment.
For more information about how to log in to the router through Telnet, see
H3C SR6600/SR6600-X
Routers Configuration Guides
.
Configuring basic settings
Step Command
Remarks
1.
Set the current time and date.
clock datetime
time date
Optional.
Available in user view.
1.
Enter system view.
system-view
Required.
Available in user view.
2.
Enter Ethernet interface view.
interface
interface-type
interface-number
N/A
3.
Specify an IP address for the
interface.
ip address
ip-address
{
mask-length
|
mask
}
[
sub
]
By default, no IP address is
assigned to any interface.
4.
Return to system view.
quit
Available in any view.
