H3C MSR810, Справочник по командам

Страница: 308 / 389

296
Views
Physical interface view
Predefined user roles
network-admin
Parameters
priority
: Specifies the priority of the physical interface in a dialer circular group, in the range of 1 to
127. The larger the value, the higher the priority.
Usage guidelines
This command sets the order in which the available physical interfaces in a dialer circular group are
used. Each time a c all is placed, the highest-priority physical interface available is selected. If
multiple physical interfaces with the highest priority are available, these interfaces are selected in a
round-robin manner.
Examples
# Set the priority of Serial 2/1/0 in dialer circular group 1 to
5
.
<Sysname> system-view
[Sysname] interface serial 2/1/0
[Sysname-Serial2/1/0] dialer circular-group 1
[Sysname-Serial2/1/0] dialer priority 5
Related commands
dialer circular-group
dialer queue-length
Use
dialer queue-length
to set the number of packets that can be buffered on a dialup interface.
Use
undo dialer queue-length
to restore the default.
Syntax
dialer queue-length packets
undo dialer queue-length
Default
No packets are buffered on a dialup interface.
Views
Dialup interface view
Predefined user roles
network-admin
Parameters
packets
: Specifies the number of packets that can be buffered on the interface, in the range of 1 to
100.
Usage guidelines
If no connection is available when a dialup interface without a buffer queue receives a packet, the
interface drops the packet. Configured with a buffer queue, the dialup interface buffers the packet
until a connection is available for packet sending.
Examples
# Set the number of packets that can be buffered to 10 on Serial 2/1/0.