H3C MSR810, Справочник по командам

Страница: 274 / 389

262
low lowthreshold
: Specifies the lower RSSI threshold value in the range of 0 t o 150, which
represents a lower RSSI threshold in the range of –150 dBm to 0 dBm. The value of
lowthreshold
cannot be smaller than the value of mediumthreshold because the system automatically adds a
negative sign to the RSSI thresholds.
medium mediumthreshold
: Specifies the upper RSSI threshold value in the range of 0 to 150, which
represents an upper RSSI threshold in the range of –150 dBm to 0 dBm.
Usage guidelines
The device performs the following operations based on the actual RSSI of the 3G/4G modem:
• Sends a trap that indicates high RSSI when the RSSI exceeds the upper threshold.
• Sends a trap that indicates normal RSSI when the RSSI is between the lower threshold and
upper threshold (included).
• Sends a trap that indicates low RSSI when the RSSI drops to or below the lower threshold.
• Sends a trap that indicates low RSSI every 10 minutes when the RSSI remains equal to or
smaller than the lower threshold.
To view the RSSI change information for a 3G/4G modem, use the
display cellular
command.
Examples
# Set the lower threshold for a 3G/4G modem in GSM mode to –110 dBm.
<Sysname> system-view
[Sysname] controller cellular 0/0
[Sysname-Cellular0/0] rssi gsm low 110
sendat
Use
sendat
to issue a configuration directive to a 3G/4G modem.
Syntax
sendat at-string
Views
Cellular interface view
Predefined user roles
network-admin
Parameters
at-string
: Specifies a configuration directive string, a string of 1 to 300 characters. This argument can
be an AT directive (containing
+++
,
A/
, or be any string beginning with
AT
) or a CNS directive. For
more information about AT directives, see the
sendat
command in
Layer 2—WAN Access
Command References
. Table 55 describes the CNS directive samples.
Table 55 CNS directive description
Directive Description
CNSn
Controls the CNS heartbeat debugging switch.
•
n = 00000500000000000000
—Enables CNS heartbeat debugging.
•
n = 00000800000000000000
—Disables CNS heartbeat debugging.
Usage guidelines
The
sendat
command does not verify the configuration directive. Each time it issues one
configuration directive to the 3G/4G modem, lowercase characters are automatically converted to
uppercase characters.