H3C MSR810, Справочник по командам

Страница: 368 / 389

356
display interface mfr
Use
display interface mfr
to display MFR interface information.
Syntax
display interface
[
mfr
[
interface-number
] ] [
brief
[
description
|
down
] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
mfr
[
interface-number
]: Specifies MFR interfaces. If you do not specify the
mfr
keyword, this
command displays information about all interfaces supported by the device. If you specify the
mfr
keyword but not the
interface-number
argument, this command displays information about all MFR
interfaces.
brief
: Displays brief information about interfaces. If you do not specify this keyword, the command
displays detailed information about interfaces.
description
: Displays complete interface descriptions. If you do not specify this keyword, the
command displays only the first 27 characters of each interface description.
down
: Displays information about the interfaces in physically down state and the causes. If you do
not specify this keyword, the command displays information about interfaces in all states.
Examples
# Display detailed information about interface MFR 0/0/2.
<Sysname> display interface mfr 0/0/2
MFR0/0/2
Current state: DOWN
Line protocol state: DOWN
Description: MFR0/0/2 Interface
Maximum Transmit Unit: 1500
Hold timer: 10 seconds, retry times: 5
Internet protocol processing: Disabled
Link layer protocol is FR IETF
LMI DLCI is 0, LMI type is Q.933a, frame relay DTE
LMI status enquiry sent 0, LMI status received 0
LMI status timeout 0, LMI message discarded 0
Physical: MFR
Output queue - Urgent queuing: Size/Length/Discards 0/100/0
Output queue - Protocol queuing: Size/Length/Discards 0/500/0
Output queue - FIFO queuing: Size/Length/Discards 0/75/0
Last clearing of counters: Never
Last 300 seconds input rate: 0 bytes/sec, 0 bits/sec, 0 packets/sec
Last 300 seconds output rate: 0 bytes/sec, 0 bits/sec, 0 packets/sec
Input: 0 packets, 0 bytes, 0 dropps
Output: 0 packets, 0 bytes, 0 dropps