H3C MSR810, Справочник по командам

Страница: 213 / 389

201
Field Description
Precedence
Priority of the IP packets carried by the PVC in the PVC-group:
•
Default
—Default PVC. IP packets without a priority configured
are transmitted through the default PVC.
•
a-b
—Lowest and highest priorities of the IP packets carried by
the PVC. The value range for
a
and
b
is 0 to 7.
a
is smaller
than
b
.
•
c
—Priority of the IP packets carried by the PVC, in the range of
0 to 7.
•
-
—No priority is configured for IP packets carried by the PVC.
Service-type
Service type:
•
CBR
—Constant bit rate.
•
UBR
—Unspecified bit rate.
•
VBR-NRT
—Variable bit rate-non real time.
•
VBR-RT
—Variable bit rate-real time.
Output-pcr Peak output rate of ATM cells.
CDVT Cell delay variation tolerance in microseconds.
Transmit-Priority Transmission priority.
OAM loopback interval Interval (in seconds) at which OAM F5 Loopback cells are sent.
OAM loopback retry interval
Interval (in seconds) at which OAM F5 Loopback retransmission
detection cells are sent.
OAM loopback retry count (up/down) Number of cells that are detected as up and down in OAM detection.
OAM AIS-RDI count (up/down)
Number of seconds that are detected as up in OAM AIS-RDI
detection. Number of cells that are detected as down in OAM
AIS-RDI detection.
Interface State
Name of the interface to which the PVC belongs, and the physical
and administrative states of the interface.
State of an interface (not a subinterface):
•
UP
—The interface is both physically and administratively up.
•
DOWN
—The interface is in either of the following states:

The interface is administratively up and physically down
(probably because no physical link is available or the link
has failed).

The interface is administratively down (shut down by using
the
shutdown
command).
State of a subinterface:
•
UP
—The interface is administratively up. The parent interface
is both physically and administratively up.
•
DOWN
—The interface or its parent interface was shut down by
using the
shutdown
command, or the parent interface is
physically down.
OAM State OAM protocol state:
UP
or
DOWN
.