H3C MSR810, Справочник по командам

Страница: 376 / 389

364
Syntax
interface mfr
{
interface-number
|
interface-number.subnumber
[
p2mp
|
p2p
] }
undo interface mfr
{
interface-number
|
interface-number.subnumber
}
Default
No MFR interface or subinterfaces exist.
Views
System view
Predefined user roles
network-admin
Parameters
interface-number
: Specifies a number for the MFR interface.
interface-number.subnumber
: Specifies a number for the MFR subinterface. The
interface-number
argument represents the number of the main MFR interface. The
subnumber
argument represents
the number of the MFR subinterface. The value range for the
subnumber
argument is 0 to 1023.
p2mp
: Specifies an M FR subinterface as a p oint-to-multipoint subinterface. By default, an M FR
subinterface is a point-to-multipoint subinterface.
p2p
: Specifies an MFR subinterface as a point-to-point subinterface.
Usage guidelines
Before creating an MFR subinterface, make sure the main MFR interface already exists.
An MFR interface is physically up when a minimum of one of its physical interfaces is up. An MFR
interface is physically down when its last physical interface is down. The link layer state of an MFR
interface is negotiated by using LMI messages.
Examples
# Create interface MFR 0/0/2, and create a point-to-multipoint subinterface.
<Sysname> system-view
[Sysname] interface mfr 0/0/2
[Sysname-MFR0/0/2] quit
[Sysname] interface mfr 0/0/2.1
[Sysname-MFR0/0/2.1]
link-protocol mfr
Use
link-protocol mfr
to enable MFR encapsulation on an interface.
Use
undo link-protocol
to restore the default.
Syntax
link-protocol mfr
undo link-protocol
Default
PPP encapsulation is enabled on all interfaces except Ethernet interfaces, VLAN interfaces, and
ATM interfaces.
Views
Interface view