H3C MSR810, Справочник по командам

Страница: 351 / 389

339
This command and the
fr traffic-shaping
command are mutually exclusive on an interface. For
more information about Frame Relay traffic shaping, see
ACL and QoS Configuration Guide
.
Examples
# Enable Frame Relay FRF.12 fragmentation on Serial 2/1/0.
<Sysname> system-view
[Sysname] interface serial 2/1/0
[Sysname-Serial2/1/0] link-protocol fr
[Sysname-Serial2/1/0] fr fragment enable
fr fragment size
Use
fr fragment size
to set the fragment size allowed on a Frame Relay interface.
Use
undo fr fragment size
to restore the default.
Syntax
fr fragment size size
undo fr fragment size
Default
The fragment size allowed on a Frame Relay interface is 45 bytes.
Views
Interface view
Predefined user roles
network-admin
Parameters
size
: Specifies the fragment size in the range of 16 to 1600 bytes.
Examples
# Set the fragment size to 300 bytes on Serial 2/1/0.
<Sysname> system-view
[Sysname] interface serial 2/1/0
[Sysname-Serial2/1/0] link-protocol fr
[Sysname-Serial2/1/0] fr fragment size 300
fr inarp
Use
fr inarp
to enable Frame Relay InARP on a Frame Relay interface.
Use
undo fr inarp
to disable Frame Relay InARP on a Frame Relay interface.
Syntax
fr inarp ip
[
dlci-number
]
undo fr inarp ip
[
dlci-number
]
Default
Frame Relay InARP is enabled on a Frame Relay interface.
Views
Interface view