H3C MSR810, Справочник по командам

Страница: 133 / 389

121
reset l2tp tunnel
Use
reset l2tp tunnel
to disconnect tunnels and all sessions within the tunnels.
Syntax
reset l2tp tunnel
{
id tunnel-id
|
name remote-name
}
Views
User view
Predefined user roles
network-admin
Parameters
id tunnel-id
: Specifies a tunnel by its local ID in the range of 1 to 65535.
name remote-name
: Specifies L2TP tunnels by the tunnel peer name, a case-sensitive string of 1 to
31 characters.
Usage guidelines
When the number of user connections is 0 or a network fault occurs, you can disconnect the L2TP
tunnel by using this command on either the LAC or LNS. After the tunnel is disconnected, all
sessions within it are disconnected.
If you specify a tunnel peer name, all tunnels with the tunnel peer name will be disconnected. If no
tunnel with the tunnel peer name exists, nothing happens.
A tunnel disconnected by force can be re-established when a client makes a call.
Examples
# Disconnect all tunnels with the tunnel peer name of
aaa
.
<Sysname> reset l2tp tunnel name aaa
Related commands
display l2tp tunnel
service
Use
service
to specify a primary traffic processing slot for an interface.
Use
undo service
to restore the default.
Syntax
Distributed devices in standalone mode:
service slot slot-number
undo service slot
Default
No primary traffic processing slot is specified for an interface.
Views
Virtual PPP interface view
Predefined user roles
network-admin