H3C MSR810, Справочник по командам

Страница: 363 / 389

351
<Sysname> reset fr compression iphc
Related commands
display fr compression iphc
reset fr inarp
Use
reset fr inarp
to clear dynamic address-to-DLCI maps established by InARP.
Syntax
reset fr inarp
[
interface interface-type interface-number
[
dlci dlci-number
] ]
Views
User view
Predefined user roles
network-admin
Parameters
interface interface-type interface-number
: Specifies an interface by its type and number. It can be a
main interface or subinterface. If you specify a main interface, this command clears information for
the main interface and its subinterfaces. If you specify a subinterface, this command clears
information for the subinterface. If you do not specify an interface, this command clears information
for all interfaces.
dlci dlci-number
: Specifies a VC by its DLCI in the range of 16 to 1007. DLCIs 0 through 15 and 1008
through 1023 are reserved. If you specify a VC, this command clears the dynamic address-to-DLCI
map of the VC.
Usage guidelines
In some situations, for example, when the network topology changes, the dynamic address-to-DLCI
maps will become invalid. Before dynamic address-to-DLCI maps are established again, clear all
dynamic address-to-DLCI maps.
Examples
# Clear all dynamic IPv4 address-to-DLCI maps.
<Sysname> reset fr inarp
Related commands
fr inarp
reset fr ipv6 ind
Use
reset fr ipv6 ind
to clear dynamic IPv6 address-to-DLCI maps.
Syntax
reset fr ipv6 ind
[
interface interface-type interface-number
[
dlci dlci-number
] ]
Views
User view
Predefined user roles
network-admin