H3C MSR810, Справочник по командам

Страница: 235 / 389

223
Usage guidelines
Before you collect traffic statistics within a specific time period on an interface, clear the existing
statistics for the interface.
If you do not specify the
virtual-ethernet
keyword, this command clears statistics for all interfaces.
If you specify the
virtual-ethernet
keyword but do not specify the
interface-number
argument, this
command clears statistics for all VE interfaces.
If you specify both the
virtual-ethernet
keyword and the
interface-number
argument, this command
clears statistics for the specified VE interface.
Examples
# Clear statistics for the interface Virtual-Ethernet 2/4/1.
<Sysname> reset counters interface virtual-ethernet2/4/1
service cbr
Use
service cbr
to set the PVC service type to CBR and set the related parameters.
Use
undo service
to restore the default.
Syntax
service cbr output-pcr
[
cdvt cdvt_value
]
undo service
Default
The service type of a PVC is UBR. The peak output rate of ATM cells equals the maximum
bandwidth of the interface to which the PVC belongs.
Views
PVC view
PVC view in a PVC-group
Predefined user roles
network-admin
Parameters
output-pcr
: Specifies the peak output rate of ATM cells in kbps. Table 47 shows the value ranges for
the
output-pcr
argument on different interfaces.
Table 47 Peak output rate value ranges
Interface type Peak output rate value range
ATM ADSL2+ 64 to 640
ATM SHDSL_4WIRE 128 to 4624
ATM SHDSL_8WIRE_BIS 256 to 22784
ATM OC-3c/STM-1 64 to 155000
ATM subinterface
Same as that of the ATM interface to which the ATM
subinterface belongs.
PVC-group
Same as that of the ATM interface to which the
PVC-group belongs.
cdvt cdvt_value
: Specifies the cell delay variation tolerance in the range of 0 to 10000 μs. The
default is 500 μs, which means that the maximum cell delay is 500 μs.