Antaira Technologies
LMP-1202M-SFP Series
12-Port Industrial PoE+ Managed Ethernet Switch, w/8*10/100Tx
(30W/Port), 2*10/100/1000Tx RJ45, and 2*100/1000 SFP Slots,
48~55VDC Power Input
Quick Installation Guide
Version 1.1
(February 2020)
Tel: 1-844-268-2472
Fax: 1-714-671-9944
www.antaira.com
19020000000109
Package Check List
The package contains the following items:
1
– Quick installation guide
1
– LMP-1202M-SFP(-T)
1
– Wall mounting bracket set with screws
1
– DC cable –18 AWG & DC jack 5.5 x 2.1mm
1
– RJ45 to DB9 Serial Console cable
1
– RJ45 dust cover set
Front Panel Layout
Top Panel View
LMP-1202M-SFP series top panel is equipped with one 6-pin
removal terminal block connector for dual DC power inputs
(48~55VDC).
Product Overview
System Interface/Performance
All RJ45 ports support the auto MDI function
Embedded 8*10/100Tx (PSE: 30W/Port), 2*10/100/1000Tx
RJ45, and 2*100/1000 SFP Slots
Store-and-forward switching architecture
8K MAC address table
Power line EFT protection: 2,000VDC; Ethernet ESD
Protection: 6,000VDC
Power Input & Connection
DC 48 to 55V redundant power with a 6-pin removal terminal
block
It is recommended to use a UL listed industrial power supply
Operating Temperature
Standard operating temperature model: -10°C to 70°C
Extended operating temperature model: -40°C to 75°C
Case/Installation
IP30 protection
DIN-Rail and wall mount design
LED Indicators
LED
Color
Description
Power 1
Green
On
Power input 1 is active
Off
Power input 1 is inactive
Power 2
Green
On
Power input 2 is active
Off
Power input 2 is inactive
Fault
Green/Red
Green
Preconfigured alarms are not detecting failure
Red
Preconfigured alarms are detecting failure
Flashing
Switch is in the process of booting
Master
Green
On
ERPS Owner Mode (Ring Master) is ready
Off
ERPS Owner Mode (Ring Master) is not active
Ring
Green
On
Ring Network is active
Off
Ring Network is not active
LAN Port 1~8
(Upper LED)
Green
On
Connected to network, 10/100Mbps
Flashing
Networking is active
Off
Not connected to network
LAN Port 1~8
(Lower LED)
PoE Indicators
Green
On
The port is supplying power to the powered-device
Off
No powered-device attached or power supplying fails
LAN Port 9~10
(Upper LED)
Green
On
Connected to network, 1000Mbps
Flashing
Networking is active
Off
Not connected to network
LAN Port 9~10
(Lower LED)
Green
On
Connected to network, 10/100Mbps
Flashing
Networking is active
Off
Not connected to network
SFP Port
11~12
LINK/ACT
Green:1000Mbps
/
Amber:100Mbps
On
Connected to network
Flashing
Networking is active
Off
Not connected to network
Grounding Screw
6-Pin Removal Terminal Block (Power Input)
Grounding Screw
LAN# 1~8
– 10/100Tx RJ45
LAN# 1~8
– LED for PoE Status
LED for Power 1, Power 2, Fault, Master,
and Ring
RJ45 for Serial Console RS232
LAN# 1~8
– LED for Link/Activity
Status 10/100Mbps
SFP# 11~12
– LED for Link/Activity Status
SFP# 11~12
– 100/1000 SFP
USB2.0
– Configuration Backup Port
Reset Button
LAN# 9~10
– 10/100/1000Tx RJ45
LAN# 9~10
– LED for Link/Activity Status
1000Mbps
LAN# 9~10
– LED for Link/Activity Status
10/100Mbps
6-Pin Removal Terminal Block (Power Input)
