Operation Manual – SSH
H3C S3100 Series Ethernet Switches
Chapter 1 SSH Configuration
1-30
II. Network diagram
Figure 1-13
Switch acts as server for password and RADIUS authentication
III. Configuration procedure
1)
Configure the RADIUS server
Note:
This document takes CAMS Version 2.10 as an example to show the basic RADIUS
server configurations required.
# Add an access device.
Log into the CAMS management platform and select
System Management
>
System
Configuration
from the navigation tree. In the
System Configuration
window, click
Modify
of the
Access Device
item, and then click
Add
to enter the
Add Access
Device
window and perform the following configurations:
z
Specify the IP address of the switch as 192.168.1.70.
z
Set both the shared keys for authentication and accounting packets to
expert
.
z
Select
LAN Access Service
as the service type.
z
Specify the ports for authentication and accounting as 1812 and 1813
respectively.
z
Select
Extensible Protocol
as the protocol type.
z
Select
Standard
as the RADIUS packet type.
