Operation Manual – Login
H3C S3100 Series Ethernet Switches
Chapter 3 Logging in through Telnet
3-11
Operation
Command
Description
Set the timeout time for
the user interface
idle-timeout
minutes
[
seconds
]
Optional
The default timeout time of a
user interface is 10 minutes.
With the timeout time being
10 minutes, the connection to
a user interface is terminated
if no operation is performed in
the user interface within 10
minutes.
You can use the
idle-timeout
0 command to disable the
timeout function.
Note that if you configure to authenticate the users in the scheme mode, the command
level available to the users logging into the switch depends on the
user privilege level
level
command and the
service-type
{
ftp
|
lan-access
|
{
ssh
|
telnet
|
terminal
}*
[
level level
] } command, as listed in
Table 3-7
.
Table 3-7
Determine the command level when users logging into switches are
authenticated in the scheme mode
Scenario
Authenticati
on mode
User type
Command
Command
level
The
user privilege level
level
command is not executed, and
the
service-type
command does
not specify the available
command level.
Level 0
The
user privilege level
level
command is not executed, and
the
service-type
command
specifies the available command
level.
Determined
by the
service-type
command
The
user privilege level
level
command is executed, and the
service-type
command does not
specify the available command
level.
Level 0
authenticatio
n-mode
scheme
[
command-a
uthorization
]
VTY users that
are
AAA&RADIUS
authenticated
or locally
authenticated
The
user privilege level
level
command is executed, and the
service-type
command specifies
the available command level.
Determined
by the
service-type
command
