Operation Manual – AAA
H3C S3100 Series Ethernet Switches
Chapter 2 AAA Configuration
2-19
Table 2-17
Set the status of RADIUS servers
Operation
Command
Remarks
Enter system view
system-view
—
Create a RADIUS scheme
and enter its view
radius scheme
radius-scheme-name
Required
By default, a RADIUS
scheme named "system"
has already been created
in the system.
Set the status of the primary
RADIUS
authentication/authorization
server
state
primary
authentication
{
block
|
active
}
Set the status of the primary
RADIUS accounting server
state
primary
accounting
{
block
|
active
}
Set the status of the
secondary RADIUS
authentication/authorization
server
state
secondary
authentication
{
block
|
active
}
Set the status of the
secondary RADIUS
accounting server
state
secondary
accounting
{
block
|
active
}
Optional
By default, the RADIUS
servers specified with IP
addresses in the RADIUS
scheme are all in the
active
state.
2.2.8 Configuring the Attributes of Data to be Sent to RADIUS Servers
Table 2-18
Configure the attributes of data to be sent to RADIUS servers
Operation
Command
Remarks
Enter system view
system-view
—
Create a RADIUS
scheme and enter its
view
radius scheme
radius-scheme-name
Required
By default, a RADIUS
scheme named "system" has
already been created in the
system.
Set the format of the
user names to be sent
to RADIUS server
user-name-format
{
with-domain
|
without-domain
}
Optional
By default, the user names
sent from the switch to
RADIUS server carry ISP
domain names.
Set the units of data
flows to RADIUS
servers
data-flow-format data
{
byte
|
giga-byte
|
kilo-byte
|
mega-byte
}
packet
{
giga-packet
|
kilo-packet
|
mega-
packet
|
one-packet
}
Optional
By default, in a RADIUS
scheme, the data unit and
packet unit for outgoing
RADIUS flows are byte and
one-packet respectively.
