GVS CHTF-10.1/20.1.2 Series, Руководство пользователя

Страница: 58 / 101

K-BUS KNX/EIB 3.5/5.0/10.1 inch Touch Panel Plus
55
○ R
Parameter “Ventilation status after bus recovery”
This parameter is used set the ventilation status after bus recovery. Options:
No action
On
Off
Before bus power off *
If “Off” is selected, the Icon window are no operable, expect “New Filter”, “On” and “Off”; If “On” is selected,
the Icon window is operable.
NOTE: The Ventilation function of the 3.5/5.0/10.1 inch panel does not support restore the state before power off
currently.
Parameter “Default fan speed”
This parameter is used to set the default fan speed while the ventilation is turn on. Options:
Low
Medium
High
Parameter “Data type of Fan speed”
This parameter is used to set the data type of Fan speed. Options:
1bit
1byte
——Parameter “Output value for fan speed off/low/medium/high”
It is visible while the data type of Fan speed is “1 byte”, defining the output value of fan speed
off/low/medium/high. Options: 0..255
——Parameter “Object value for fan speed off/low/medium/high”
It is visible while the data of Fan speed is “1 bit”. defining the object value for fan speed off/low/medium/high
and sent by three 1 bit object at the same time. Options:
No.1=0, No.2=0, No.3=0
No.1=1, No.2=0, No.3=0
No.1=0, No.2=1, No.3=0
No.1=1, No.2=1, No.3=0
No.1=0, No.2=0, No.3=1
No.1=1, No.2=0, No.3=1
No.1=0, No.2=1, No.3=1
No.1=1, No.2=1, No.3=1