GVS CHTF-10.1/20.1.2 Series, Руководство пользователя

Страница: 55 / 101

K-BUS KNX/EIB 3.5/5.0/10.1 inch Touch Panel Plus
52
○ R
——Parameter “Floor status”
This parameter is used to set the status of Heating windows about Scene x. Options:
Off
On
NOTE: While “Floor status” is “Off”, Temperature Setting is meaningless.
——Parameter “Set temperature[10..80]*0.5
℃
”
This parameter is used to set the temperature setting of Scene x. Options: 10..80
（
5~40
℃
).
Parameter “Heating timer function control via object”
This parameter is used to enable the Heating Timer function, with total 8 timers available. Options:
No
Disable=0/Enable=1
Disable=1/Enable=0
While the last two options are selected, the object used to disable/enable the timing function is visible.
It can disable/enable the Heating Timer function through object. After completed program or bus recovery,
the default statue is “Disable”
Switching on/off or choosing the scene can exit the timer.
——Parameter “Timer x, x=1~8”
This parameter is used to enable Timer x. Options:
Disable
Enable
——Parameter “Floor status”
This parameter is used to set the Floor status windows of Timer x. Options:
Off
On
When it is “off”, setting the temperature is meaningless.
——Parameter “Set temperature [10..80]*0.5
℃
”
This parameter is used to set the Temperature Setting of Timer x. Options:10..80 (5~40°C)