K-BUS
KNX/EIB 3.5/5.0/10.1 inch Touch Panel Plus
27
○
R
——Parameter“Language name * ”
This parameter is visible when you select language “other*” to enter the language name. The device will
display the matching language based on the name to the library.When there is no other language found, the
default language will be English
Parameter“Sending cycle of “in operation”telegram (1...240s, 0 = inactive):”
This parameter is to set the time interval when cycle send messages through the bus to indicate the normal
operation of this module. When set to "0", the object "in operation" will not send a telegram. If the setting is not
"0", the object "in operation" will send a telegram according to the set period time with logic "1" to the bus.
Options: 0.....240s, 0=Cycle transmission is inactive.
In order to reduce the bus load as much as possible, the maximum time interval should be selected
according to actual needs.
Parameter“Date and Time can be changed via bus”
To set whether the display date/time on the screen can be modified via the bus. Options:
NO
YES
If "YES" is selected, the object "Date" and the object "Time" are visible, and the date and time can be
modified by the two objects respectively.
Parameter“Screen brightness initial value [10..100]%”
To set the initial brightness value of the screen. Options: 10..100
Parameter“Screen brightness can be changed via bus”
To set whether the screen brightness can be modified via the bus. Options:
NO
YES
If "YES" is selected, the object "Screen backlight brightness" is visible, which is used to modify the screen
brightness.
Parameter“UI style for main page”
To set the UI style of the main page. Options:
Default
1 *
2 *
3 *
NOTE:
The 3.5/5.0/10.1 inch Touch Panel supports default UI only temporally.
