background image

Be sure the area is clear of bystanders before operating.
Stop machine if anyone enters the area.

Plan your mowing pattern in such a way as to avoid
discharging material toward roads, sidewalks, bystanders,
vehicles, windows, etc. Do not discharge material against
a wall or obstruction. Doing so may cause the discharged
material to ricochet back toward the operator.

Do not mow anything but grasses.

Stop the blades when crossing dirt, gravel, or paved
surfaces.

Avoid dangerous environments. Do not operate the
mower in the rain or in wet or damp grass. To reduce the
risk of electric shock, do not expose to water or operate
on wet ground.

2.4

MOWING

For riding mower models, always remain seated while
operating machine.

Do not operate on inclines greater than 15 degrees.

Mow only in daylight or in good artificial light. Never
rush a mowing job.

Never attempt high-speed maneuvering, especially in
crowded, congested areas or on slopes.

In order to avoid contact with the blade or injury caused
by a thrown object, stay in the operating zone behind the
handles, and keep children and bystanders at least 100ft
(30m) away from the mower while it is in operation. Stop
the motor immediately if someone enters the mowing
area.

Look down and behind before and while moving
backwards.

Slow down before turning.

Do not mow in reverse unless absolutely necessary.

When moving in reverse, SLOWLY pull right and left
Drive Control Levers rearward and avoid sudden
movements. Rapid movement of the Drive Control
Levers in either direction could result in a reaction of the
machine that can cause serious injury.

Do not put hands or feet near rotating parts or under the
cutting deck. Contact with the blade can amputate hands
and feet.

If the mower starts to vibrate excessively, stop the motor
and check for the cause immediately. Excessive vibration
is generally a sign the mower is not functioning properly.

Stop the motor and wait until the blade comes to a
complete stop before unclogging the chute. The cutting
blade will continue to rotate for a few seconds after the
motor is shut off. Do not place any part of your body in
the blade area until you are sure that the blade has
stopped rotating.

Disengage blade(s) when not mowing. Shut off engine
and wait for all parts to come to a complete stop before
cleaning the machine or unclogging the discharge guard.

If lawnmower strikes a foreign objects, stop the machine,
rotate the ignition switch to "OFF" position, then, if it is
safe, inspect for damage.

Don't force the lawnmower.

Do not use the mower for any job except that for which it
is intended.

2.5

SERVICING

Turn off the machine before servicing or removing blade.

Do not reach under blade guard. Keep hands, feet, and
clothing way from rotating blades.

To reduce risk of injury to persons, remove battery pack
when not in use.

To reduce personal risk and damage to the machine, never
clean with pressure washer.

Maintain your mower. Keep cutting edges sharp and
clean to ensure the best performance and safe operation.

Remove or disconnect battery before servicing, cleaning
or removing material from lawnmower.

2.6

SLOPE OPERATION

Slopes are a major factor related to loss of control and tip-
over accidents, which can result in severe injury or death.
Operation on all slopes requires extra caution. If you cannot
back up the slope or if you feel uneasy on it, do not mow it.

Mow up and down slopes, not across.

Watch for holes, ruts, bumps, rocks, or other hidden
objects. Uneven terrain could overturn the machine. Tall
grass can hide obstacles.

Choose a low ground speed so you will not have to stop
or shift while on a slope.

Do not mow on wet grass. Tires may lose traction.

Always keep the machine in gear when going down
slopes. Do not shift to neutral and coast downhill.

Avoid starting, stopping, or turning on a slope. If the tires
lose traction, disengage the blade(s) and proceed slowly
straight down the slope.

Keep all movement on slopes slow and gradual. Do not
make sudden changes in speed or direction, which could
cause the machine to roll over.

Use extra care while operating machine with attachments;
they can affect the stability of the machine. Do not use on
steep slopes.

Do not try to stabilize the machine by putting your foot
on the ground.

Do not mow near drop-offs, ditches or embankments. The
machine could suddenly roll over if a wheel goes over the
edge or if the edge caves in.

2.7

CHILD SAFETY

Tragic accidents can occur if the operator is not aware of the
presence of children. Children are often attracted to the
machine and the mowing activity. Never assume that children
will remain where you last saw them.

Never leave machine unattended with key in switch,
especially with children present.

4

English

EN

P0802464-00 v1.2

Содержание CZ52R








































Отзывы: