background image

16.7 NO OTHER WARRANTIES

This agreement is understood to be the complete and

exclusive agreement between the parties, superseding all prior

agreements, oral or written, and all other communications

between the parties relating to the subject matter of this

agreement.

16.8 OWNER'S RESPONSIBILITY

You must maintain your Greenworks Commercial Mower

following the maintenance procedures described in your

owner's manual. Such routine maintenance, whether

performed by a dealer or by you, is at your expense.
This machine, like any other powered equipment, is

potentially dangerous unless properly operated. Any operator

must be cautious and keep safety in mind at all times. Any

operator, prior to using the Greenworks Commercial Mower,

should thoroughly familiarize himself with the owner's

manual regarding operation and safety of the machine, as well

as all safety warnings on the machine itself.

16.9 ALLOCATION OF RISKS

This agreement allocates the risks of product failure between

Greenworks Commercial and the purchaser. This allocation is

recognized by both parties and is reflected in the price of the

goods.

16.10 WARRANTY REGISTRATION

1. Owners must register the unit by filling out the Warranty

Registration Form, which is provided in theowner’s

manual. It MUST be completed and signed by the

authorized dealer and original purchaser.

2. For validation, the completed Warranty Registration Form

MUST be forwarded to GreenworksCommercial , within

10 days following date of purchase.

3. The date of purchase constitutes delivery.

37

English

EN

P0802464-00 v1.2

• Repairs or replacement resulting from the use of

unauthorized parts, accessories or attachments.

• Repairs or replacement as the result if any alterations or

modifications, in the determination ofGreenworks

Commercial, which adversely affects the operation,

performance or durability of the equipment.

• Mowers that have had their serial number removed or

made illegible.

• Depreciation or damage caused by normal wear, lack of

reasonable and proper maintenance, failureto follow the

product’s owner’s manual operating, maintenance and

adjustment instructions or other operational instructions

provided by Greenworks Commercial.

• Normal maintenance parts and service including, but not

limited to, lubricants, tune-up parts, blades,blade

sharpening, bearings, brake or steering adjustments.

16.4 DISCLAIMER OF WARRANTY

The foregoing warranties are in lieu of all other warranties,

expressed or implied, including but not limited to the implied

warranties of merchantability and fitness for a particular

purpose. However, if the Greenworks Mower is purchased as

a consumer product, any implied warranty of merchantability

or fitness for a particular purpose is limited to the duration of

this limited warranty. Some states do not allow limitations on

how long an implied warranty lasts, so the above limitation

may not apply to you. This warranty gives you specific legal

rights, and you may also have other rights which vary from

state to state.

16.5 LIMITATION OF REMEDIES

In no case shall Greenworks Commercial be liable for any

special, incidental, or consequential damages based upon

breach of warranty, breach of contract, negligence, strict

liability in tort, or any other legal theory. Such damages

include, but are not limited to:
• Loss of profits
• Loss of savings or revenue
• Loss of use of the Greenworks Commercial Mower or

any associated equipment

• Cost of capital
• Cost of any substitute equipment, facilities, services or

downtime

• The claims of third parties, including customers, and

injury to property

16.6 TIME LIMIT

Any action for breach of warranty must be commenced

within 24 months following delivery of the goods in a

residential application. Any action for breach of warranty

must be commenced within twelve to 12-24 months following

delivery of the goods in a commercial application.

Содержание CZ52R








































Отзывы: