GREAT PLAINS 2S-2600 Скачать руководство пользователя страница 61

Страница: 61 / 114

2S-2600/F/HD/HDF

Table of Contents

Index

Adjustments

Great Plains

| 195-440M | 2019-05-03

Table of Contents

Index

00HD Row Unit Adjustments

Refer to Figure 57

(which depicts a row unit fully populated with all

optional accessories supported for use with the

2S-2600HD/HDF drill)

From front to back, a Great Plains 00HD Series row unit

can include the following capabilities (some optional):
1. Opener height adjustment: standard

If a few rows need to run deeper, such as in tire

tracks, the arm’s pivot point may be lowered. See

“

Opener Height

” on page 58.

2. Single Down Pressure Spring: standard

Each row unit is mounted on the drill as a pivoting

arm which allows the row unit to independently move

up and down. The adjustable spring provides the

force to get the row unit and attachments into the

soil. See “

Row Unit Down Pressure (Spring)

” on

page 58.

3. Disc Blades: standard, 2 per row unit

Double disc blades open a furrow, creating the seed

bed. Spacers adjust the blades for a clean furrow.

See “

Disk Blade Adjustments

” on page 59.

4. Seed delivery tube: standard

No adjustments are necessary.

5. Disk Scraper: optional

In sticky soils, a scraper helps keep the opener disks

operating freely. See “

Disk Scraper Adjustments

”

on page 60.

6. Fertilizer delivery tube: optional

The tube may be reversed to drop fertilizer with the

main seed, or just ahead of the press wheels.

7. Small Seeds delivery tube: optional

The tube may be reversed to drop small seed near

the main seed tube, or just ahead of the press

wheels.
If fertilizer is also installed, the Small Seeds tube is

mounted outside the opener frame.

8. Seed firmer: seed flap (not shown) standard:

Keeton seed firmer (shown)

Improves seed-soil contact, and provides a stable

arm for a low-rate liquid fertilizer delivery tube. See

“

Keeton Seed Firmer Adjustment

” on page 60.

Seed-Lok™ firming wheel (not shown)

Improves seed-soil contact. See “

Seed-Lok™ Seed

Firmer Lock-Up

” on page 61.

9. Press wheels: standard (choice of types)

These close the seed trench. The wheels also sup-

port the free end of the row unit, and provide the pri-

mary control over seeding depth. See “

Opener

Depth (Press Wheel Height)

” on page 61.

Certain Machine Damage:

Do not back up with row units in the ground. To do so will

cause severe damage and row unit plugging.

Figure 57

00HD Series Row Unit

26427

Содержание 2S-2600



















































































































Результаты поиска

Содержание 2S-2600

Отзывы:

Похожие инструкции для 2S-2600

Бренды по названию

Популярные бренды

GREAT PLAINS 2S-2600, Руководство оператора

Результаты поиска

Содержание 2S-2600

Отзывы:

Похожие инструкции для 2S-2600

Бренды по названию

Популярные бренды