Grandstream Networks UCM6510, Руководство пользователя

Страница: 372 / 483

P a g e | 371
UCM6510 IP PBX User Manual
Version 1.0.20.31
"International Call Country Code+Destination number".
When making outbound call, UCM will check "International
Call Prefix” then
“Country Code", if the combination exists in the blacklist, then the call will
fail, otherwise, the call will be authorized.
For example: If blacklist is selecting countries with prefix code 001, dialing
a number like 00123456789 will be blocked even if the number is not part
of blacklisted countries if “International Call Prefix” is not set. While in same
example, if “International Call Prefix” is set to “00”, UCM will allow the dialed
number.
Extension Preferences
Enforce Strong Password
If enabled, strong password will be enforced for the password created on
the UCM6510. The default setting is enabled.
Strong Password Rules:
1. Password for voicemail, voicemail group, outbound route, DISA, call
queue and conference require non-repetitive and non-sequential digits,
with a minimum length of 4 digits.
Repetitive digits pattern (such as 0000, 1111, 1234, 2345, and etc), or
common
digits’ pattern (such as 111222, 321321 and etc) are not
allowed to be configured as password.
2. Password for extension registration, Web GUI admin login, LDAP and
LDAP sync requires alphanumeric characters containing at least two
categories of the following, with a minimum length of 4 characters.

Numeric digits

Lowercase alphabet characters

Uppercase alphabet characters

Special characters
Enable Random Password
If enabled, random password will be generated when the extension is
created. The default setting is "Yes". It is recommended to enable it for
security purpose.
Enable Auto E-mail
Notification
If enabled, UCM6510 will send Email notification to user automatically after
editing extension settings or adding a new extension.
Disable Extension Range
If set to "Yes", users could disable the extension range pre-
configured/configured on the UCM6510. The default setting is "No".
The default extension range assignment is shown in “Extension Ranges”
below.
Note:
While there are no issues with disabling extension ranges, system
administrators will need to manage extensions to avoid extension conflicts.