Grandstream Networks UCM6510 Скачать руководство пользователя страница 205

Страница: 205 / 483

P a g e

204

UCM6510 IP PBX User Manual

Version 1.0.20.31

VOIP TRUNKS

VoIP Trunk Configuration

VoIP trunks can be configured in UCM6510 under Web GUI



Extension/Trunk



VoIP Trunks

. Once

created, the VoIP trunks will be listed with Provider Name, Type, Hostname/IP, Username and Options to

edit/detect the trunk.

Note

: UCM6510 supports now 200 VoIP trunks.



Click on "Create New SIP Trunk" or "Create New IAX Trunk" to add a new VoIP trunk.



Click on

to configure detailed parameters for the VoIP trunk.



Click on

to configure Direct Outward Dialing (DOD) for the SIP Trunk.



Click on

to start LDAP Sync.



Click on

to delete the VoIP trunk.

For VoIP trunk example, please refer to the following document:

http://www.grandstream.com/sites/default/files/Resources/ucm6xxx_sip_trunk_guide.pdf

The VoIP trunk options are listed in the table below.

Table 59: Create New SIP Trunk

Type

Select the VoIP trunk type.



Peer SIP Trunk



Provider Name

Configure a unique label (up to 64 characters) to identify this trunk when

listed in outbound rules, inbound rules and etc.

Host Name

Configure the IP address or URL for the VoIP provider’s server of the trunk.

Keep Original CID

Keep the CID from the inbound call when dialing out. This setting will
override “Keep Trunk CID” option. Please ensure that the remote peer

PBX supports matching user entry via the "username" field from

authentication line.

Keep Trunk CID

If enabled, the trunk CID will not be overridden by extension’s CID when
the extension has CID configured. The default setting is “No”.

NAT

Turn on this setting when the PBX is using public IP and communicating

with devices behind NAT. If there is one-way audio issue, usually it is

related to NAT configuration or SIP/RTP port support on the firewall.

Disable This Trunk

If checked, the trunk will be disabled.

Содержание UCM6510




































































































































































































































































































































































































































































































Результаты поиска

Содержание UCM6510

Отзывы:

Похожие инструкции для UCM6510

Бренды по названию

Популярные бренды

Grandstream Networks UCM6510, Руководство пользователя

Результаты поиска

Содержание UCM6510

Отзывы:

Похожие инструкции для UCM6510

Бренды по названию

Популярные бренды