Gogen TVH24R384STWEB, Инструкция по эксплуатации

Страница: 43 / 76

English - 81 -
WARNING
Do not ingest the battery, Chemical Burn Hazard
This product or the accessories supplied with the
product may contain a coin/button cell battery. If the
coin/button cell battery is swallowed, it can cause
severe internal burns in just 2 hours and can lead
to death.
Keep new and used batteries away from children.
If the battery compartment does not close securely,
stop using the product and keep it away from
children.
If you think batteries might have been swallowed or
placed inside any part of the body, seek immediate
medical attention.
WARNING
Never place a television set in unstable or inclined
locations. A television set may fall, causing serious
personal injury or death. Many injuries, particularly
to children, can be avoided by taking simple
precautions such as;
‡ Using cabinets or stands recommended by the
manufacturer of the television set.
‡ Only using furniture that can safely support the
television set.
‡ Ensuring the television set is not overhanging the
edge of the supporting furniture.
‡ Not placing the television set on tall furniture
(for example, cupboards or bookcases) without
anchoring both the furniture and the television set
to a suitable support.
‡ Not standing the television set on cloth or other
materials placed between the television and
supporting furniture.
‡ Educating children about the dangers of climbing
on furniture to reach the television set or its
controls. If your existing television set is being
retained and relocated, the same considerations
as above should be applied.
WALL MOUNTING WARNINGS
‡ Read the instructions before mounting your TV
on the wall.
‡ The wall mount kit is optional. You can obtain from
your local dealer, if not supplied with your TV.
‡ Do not install the TV on a ceiling or on an inclined
wall.
‡8VHWKHVSHFL¿HGZDOOPRXQWLQJVFUHZVDQGRWKHU
accessories.
‡7LJKWHQWKHZDOOPRXQWLQJVFUHZV¿UPO\WRSUHYHQW
the TV from fall. Do not over-tighten the screws.
WARNING
Apparatus connected to the protective earthing
of the building installation through the MAINS
connection or through other apparatus with a
connection to protective earthing – and to a
television distribution system using coaxial cable,
PD\ LQ VRPH FLUFXPVWDQFHV FUHDWH D ¿UH KD]DUG
Connection to a television distribution system has
therefore to be provided through a device providing
electrical isolation below a certain frequency range
(galvanic isolator, see EN 60728-11)
Environmental Information
This television is designed to be environment friendly.
To reduce energy consumption, you can follow these
steps:
If you set the
Energy Saving to Minimum , Medium,
Maximum or Auto the TV will reduce the energy
consumption accordingly. If you like to set the
Backlight WRD¿[HGYDOXHVHWDV Custom and adjust
the Backlight (located under the Energy Saving
setting) manually using Left or Right buttons on the
remote. Set as
Off to turn this setting off.
Note: Available Energy Saving options may differ depending
on the selected Mode in the System>Picture menu.
The Energy Saving settings can be found in the
System>Picture menu. Note that some picture
settings will be unavailable to be changed.
If pressed Right button while
Auto option is selected or
Left button while Custom option is selected, “ Screen
will be off in 15 seconds. ” message will be displayed
on the screen. Select Proceed and press OK to turn
the screen off immediately. If you don’t press any
button, the screen will be off in 15 seconds. Press
English - 82 -
any button on the remote or on the TV to turn the
screen on again.
Note: Screen Off option is not available if the Mode is set
to Game .
When the TV is not in use, please switch off or
disconnect the TV from the mains plug. This will also
reduce energy consumption.
Features
‡ Remote controlled colour TV
‡ Fully integrated digital terrestrial/cable/satellite TV
(DVB-T2/C/S2)
‡ HDMI inputs to connect other devices with HDMI
sockets
‡ USB input
‡ OSD menu system
‡ Stereo sound system
‡ Teletext
‡ Headphone connection
‡ Automatic programming system
‡ Manual tuning
‡ Automatic power down after up to eight hours.
‡ Sleep timer
‡ Child lock
‡ Automatic sound mute when no transmission.
‡ NTSC playback
‡ AVL (Automatic Volume Limiting)
‡ PLL (Frequency Search)
‡ PC input
‡ Game Mode (Optional)
‡ Picture off function
‡ Programme recording
‡ Programme timeshifting
‡ Ethernet (LAN) for Internet connectivity and service
‡ 802.11 a/b/g/n WIFI Support via USB dongle (not
supplied)
‡ Audio Video Sharing
‡ HbbTV
Accessories Included
‡ Remote Control
‡ Batteries: 2 x AAA
‡ Instruction Book
6WDQGE\1RWL¿FDWLRQV
If the TV does not receive any input signal (e.g. from
an
aerial or HDMI source) fo r 3 m inutes, it will go
into standby. When you next switch-on, the following
message will be displayed:
“ TV switched to stand-by
mode automatically because there was no signal
for a long time.
” Press OK to continue.
If the TV is on and it isn’t being operated for a while
it will go into standby. When you next switch-on, the
following message will be displayed.
“ TV switched to
stand-by mode automatically because no operation
was made for a long time.
” Press OK to continue.
TV Control Switch & Operation
1. Up direction
2. Down direction
3. Volume / Info / Sources List selection and
Standby-On switch
The Control button allows you to control the Volume
/ Programme / Source and Standby-On functions of
the TV.
To change volume: Increase the volume by pushing
the button up. Decrease the volume by pushing the
button down.
To change channel: Press the middle of the button,
the information banner will appear on the screen.
Scroll through the stored channels by pushing the
button up or down.
To change source: Press the middle of the button
twice(for the second time in total), the source list will
appear on the screen. Scroll through the available
sources by pushing the button up or down.
To turn the TV off: Press the middle of the button
down and hold it down for a few seconds, the TV will
turn into standby mode.
Notes:
‡ If you turn the TV off, this circle starts again beginning
with the volume setting.
‡ Main menu OSD cannot be displayed via control
button.
Operation with the Remote Control
Press the Menu button on your remote control to
display main menu screen. Use the directional buttons
to select a menu tab and press
OK to enter. Use the
directional buttons again to select or set an item. Press
Return/Back or Menu button to quit a menu screen.
Input Selection