GLP Fusion Par FP7, Руководство пользователя

Страница: 15 / 40

German Light Products®
Fusion Par FP7 User Manual Rev. A 15
Securing with a safety cable
If the FP7 can cause injury or damage if it falls,
secure it with a safety cable that is approved for the
weight that it secures and capable of catching the
fixture safely if the primary means of attachment
fails.
To secure the fixture with a safety cable:
See Figure 4. Pass a carabiner hook (arrowed) or
similar means of attachment around the safety
cable attachment point in the fixture housing
above the control panel.
Secure the fixture by adding a safety cable that
is fastened to a secure anchoring point. Remove
as much slack as possible from the safety cable
(by looping more than once around a rigging
truss chord, for example).
Mounting on a rigging truss or similar structure
The Floorstand / Mounting bracket has two
attachment points with a center-to-center distance
of 100 mm / 3.94 ins for the quarter-turn fasteners on
an omega bracket. It also has a hole that accepts
an M10 bolt.
Before installing, check that all mounting
hardware and fasteners are approved for the
weight that they will support and in perfect
condition. Fasteners must be high-tensile steel.
To mount the fixture on a rigging truss, either:
Bolt a rigging clamp to a suitable omega
bracket.
Fasten the omega bracket to the fixture’s
mounting bracket with quarter-turn
fasteners, turning the handles on both
quarter-turn fasteners a full 90° to lock
them.
Fasten the rigging clamp around a truss
chord to mount the fixture on the rigging
truss.
Secure the fixture with a safety cable as
directed above.
Or:
Bolt a rigging clamp to the fixture’s mounting bracket using a high-strength M10
bolt passed through the hole in the center of the mounting bracket yoke (see
D in
‘FP7 overview’ on page 11) and self-locking nut.
Figure 5. FP7 flown from rigging truss with
omega bracket and rigging clamp
Figure 4. Safety cable
attachment