manualshive.com logo in svg

GLP Fusion Par FP7, Руководство пользователя

Поделиться
Скачать
GLP Fusion Par FP7 Скачать руководство пользователя страница 6

www.glp.de

 

 

 

6 

 

 

Fusion Par FP7 User Manual Rev. A

 

 

General safety information  

Read this section carefully before installing or using the product. If you have any 
doubts or questions about how to use the product safely, contact your GLP® supplier 

for assistance. Your GLP supplier will be happy to help. 
The FP7 and this user manual are intended for use by experienced professionals with 
the knowledge and skills to set up, operate, and maintain high-powered, remotely 
controlled lighting equipment safely and efficiently. These operations require expertise 
that may not be provided in this manual. 

● 

Respect all warnings and directions given in this user manual and on the product. 
Read this manual and familiarize yourself with the safety precautions it contains 
before installing or using the product. The manufacturer will take no responsibility for 
damages or harm resulting from disregard for the information in this manual. 

● 

Check the GLP website at www.glp.de and make sure that you have the latest 

version of this user manual. Check also that the software version indicated on page 
2 of the user manual matches the version installed in the product. You can 
download the correct version of this user manual if necessary. 

● 

Make the user manual available to all installers and operators and save the manual 

for future reference. 

● 

If you have questions about the safe operation of the FP7, please contact an 
authorized GLP distributor (see list of distributors at www.glp.de). 

● 

Use the product only as directed in this user manual. Observe all markings in this user 
manual and on the product. 

● 

The product does not contain any user-serviceable parts. Refer any service 
operation not described in this manual and refer all repairs to a technician 
authorized by GLP. 

● 

The light source in this product must not be changed by the end user. 

● 

Read and follow the user documentation for all additional equipment. 

 

 

Electrical safety 

● 

Use only a source of AC mains power that complies with local building and 
electrical codes and has both overload and ground fault (earth fault) protection. 

● 

Ensure that the product is electrically connected to ground (earth). 

● 

Disconnect the product from AC mains power before carrying out any installation or 

maintenance work and when the product is not in use. 

● 

The product is IP65-rated, but do not expose it to high-pressure water jets and do not 
allow it to become immersed in water. 

Содержание Fusion Par FP7









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды