GLP Fusion Par FP7 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 40

background image

German Light Products®

Fusion Par FP7 User Manual Rev. A

9

●

If a seizure occurs, stop using strobe effects. Seek professional medical help. Note

the time that the seizure starts and finishes. Call emergency medical help urgently if
the seizure lasts more than five minutes, if it is the person’s first seizure, or if the person
is injured. While waiting for help to arrive, consider the following general advice for
caring for a person who is having a seizure: Protect the affected person from injuring
themselves on hard or sharp objects. If necessary, move the person to a safe place.

Lay them on their side with their head supported to prevent it from hitting the floor.
Loosen any tight clothing around their neck. Do not use force to hold the person or
restrict their movements. Do not put anything in their mouth, including your fingers.

Installation safety and protection from personal injury

●

Installation must be performed by qualified personnel only and carried out in
accordance with applicable regulations such as DIN VDE 0711-217.

●

The product is not portable when installed.

●

Ensure that the supporting structure and installation hardware used can hold at least
10 times the weight of the load that they support.

●

Suspend the product with hardware specifically designed and rated for the

purpose. Check that the hardware is in perfect condition. Fasteners must be steel
grade 8.8 strength or better. Rigging clamps must be half-coupler type that
completely encircle the rigging truss chord.

●

If the product is installed in a location where it may cause injury or damage if it falls,
install as directed in this manual a safety cable or similar secondary attachment that

will hold the product if a primary attachment fails. The secondary attachment must
be approved by an official body such as TÜV as a safety attachment for the weight
that it secures, it must comply with EN 60598-2-17 Section 17.6.6, and it must be able
to support a static suspended load that is ten times the weight that it secures.

●

Either stand the product on a safe surface or fasten the product to a structure or
surface as directed in this user manual. Do not use a safety cable as the primary
means of support.

●

Check that all covers and rigging hardware items are secure.

●

Do not operate the product with missing or damaged covers, shields or any optical

component.

●

Restrict access below the work area and work from a stable platform whenever
installing, servicing or moving the product.

●

If the product becomes damaged, stop using it immediately and disconnect it from

power. Do not attempt to use a product that is obviously damaged.

●

Do not modify the product in any way not described in this user manual.

●

Install genuine GLP parts only.

«
...
7
8
9
10
11
...
»

Содержание Fusion Par FP7









































Отзывы:

Нет отзывов

Похожие инструкции для Fusion Par FP7

Бренд: GALLERY Страницы: 18

Бренд: Keithley Страницы: 36

Бренд: Rain-Flo Irrigation Страницы: 16

Бренд: Dana Design Страницы: 20

Бренд: Eaton Страницы: 16

Бренд: Eaton Страницы: 6

Бренд: Ecco Страницы: 17

Бренд: Velp Scientifica Страницы: 12

Бренд: Yamaha Страницы: 24

Бренд: J&M Страницы: 33

Бренд: Landoll Страницы: 70

Бренд: Landice Страницы: 19

Бренд: Landice Страницы: 7

Бренд: Teac Страницы: 9

Бренд: Tascam Страницы: 3

Бренд: Tascam Страницы: 56

Portastudio 2488

Бренд: Tascam Страницы: 28

Бренд: Tascam Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды