GLP Fusion Par FP7, Руководство пользователя

Страница: 14 / 40

www.glp.de
14 Fusion Par FP7 User Manual Rev. A
5. Preparation for use
Warning!
Read ‘Safety’ starting on page 4 for important safety information
that you must understand before you install or operate the fixture.
Included Items
The Fusion Par FP7 is supplied with a power cord with powerCON connector and a
Floorstand / Mounting Bracket that accepts an M10 bolt for fastening to a rigging
clamp.
Installation
Orientation and location
The FP7 can be installed:
●
indoors in temporary or permanent installations, or
●
outdoors in temporary installations.
In outdoor installations you must protect the front of the fixture from direct sunlight. The
fixture is IP65 rated so it will withstand rain and water projections, but do not expose the
fixture to high-pressure water jets or allow the fixture to become immersed in water.
The FP7 can be used when placed on a level surface, fastened to a surface in any
orientation or fastened to a structure such as a rigging truss in any orientation.
Keep the fixture at least 0.5 m (20 in.) away from combustible materials (including
curtains and stage scenery) when the fixture is installed.
Placing on a surface
You can stand the impression FP7 upright on its Floorstand
/ Mounting bracket on a flat, stable, horizontal surface.
To use the floorstand, see Figure 3. Fold the feet on the
floorstand around so that they lock into the position
shown and form feet.
If necessary to prevent the fixture from moving or falling
(in a location that is subject to vibrations for example),
loop a ratchet strap, webbing or other bracing strap
around the legs of the floorstand and fasten it to secure
anchoring points.
Loosen the tilt adjustment handscrews (arrowed) on both
sides of the floorstand, set the fixture to the required
angle and retighten the handscrews.
Figure 3. Deploying
feet on Floorstand