GLP Fusion Par FP7, Руководство пользователя

Страница: 10 / 40

www.glp.de
10 Fusion Par FP7 User Manual Rev. A
2. Avoiding damage
Do not point the front of the fixture towards the sun or other strong light sources. The
LED lenses focuses and concentrate light just like magnifying glasses. Strong light can
cause internal damage to the fixture, melting components or starting an internal fire
within seconds.
Figure 1. Avoiding damage from light sources
Damage can occur whether the fixture is powered on or off. See Figure 1.Damage
can also occur if the light hits the front of the fixture at an angle: the fixture does not
need to be pointing
directly at the sun or other light source.
To avoid problems from strong light sources:
●
Do not expose the front of a fixture to sunlight or any other strong light source.
●
For outdoor applications during daylight, make sure that the front face of any fixture
is shielded or points away from the sun, even when not in use.
●
Avoid pointing other high-powered beam lights directly at the fixture.
Do not pick up or carry the fixture by the front bezel. The LCD display is also fragile.
Picking up or supporting the fixture in these spots could result in damage that is not
covered by the product warranty.
Use only original spare parts. Any structural modification of the system will void the
product warranty.
Inspect the fixture regularly and clean it if necessary. Clean the fixture only as directed
in this manual. Oils, solvents, and other chemicals commonly used for cleaning can
damage surfaces.
Do not drop the fixture or expose it to mechanical stress.
Do not expose the fixture to heat (from other lighting fixtures for example).
Transportation and storage
Transport the FP7 either in a flightcase or in its original packaging to protect the fixture
from damage caused by shocks during transportation.
Store the fixture in a dry location when not in use.