GLP Fusion Par FP7, Руководство пользователя

Страница: 23 / 40

German Light Products®
Fusion Par FP7 User Manual Rev. A 23
-
A fixture set to Slave 3 will run the programmed sequence P3 that is being sent by
the Master fixture.
Static
Lets you set up the static scene that the fixture will display if set to Boot

Static (see
earlier in this section).
P Edit
Lets you set up the programmed sequences P1 , P2 and P3 that the fixture will display if
set it to Boot

Program (see earlier in this section).
You can create up to 30 steps in one program.
To create the program:
Open the P Edit menu, then scroll to Prog 1 , Prog 2 or Prog 3 and press Enter .
Scroll to Step and press Enter.
Scroll to a step from 01 – 30 and press Enter .
Once you have selected a step, you can either:
-
use Capture to capture the DMX values that the fixture is currently receiving and
save that as the step, or
-
scroll through and select different effects one by one starting with the color wheel
and set a DMX value for each effect.
Once you have programmed the steps in your sequence:
-
use HoldTime to set the length of time that each step will be displayed before the
fixture moves to the next step, and
-
use FadeTime to set the speed at which one step will crossfade into the next scene.
P Play
Lets you set the fixture to replay either one program sequence P1 , P2 or P3 continuously
in a loop or replay all three sequences continuously in a loop.
P Reset
Lets you delete either one program sequence P1 , P2 or P3 or delete all three
sequences at once.
Service
Reset
Reboots and resets the fixture.
C Offset
Lets you create color offsets for the RGBW LEDs to fine-tune or calibrate the color or
white output of the fixture. Creating a color offset involves setting a maximum DMX
value to replace the normal maximum value of 255 for the color that you want to limit
in the color mix.