GLP Fusion Par FP7, Руководство пользователя

Страница: 19 / 40

German Light Products®
Fusion Par FP7 User Manual Rev. A 19
6.
Control menus and onboard display
Warning! DMX control is disabled when the control menus are active. Be
prepared for the fixture to emit strong light as soon as you exit the control
menus.
The control panel and onboard display provide access to user settings, readouts and
utilities.
Figure 6. Onboard display
The four control buttons have the following functions:
MENU : Activate the menus or go back one level towards the top of the menu.
UP : Scroll up or increase a number.
DOWN : Scroll down or reduce a number.
ENTER : Activate the control panel if it is in sleep mode. Then enter a menu, select
a setting or implement a command.
After you have applied power to the fixture and the fixture has booted, the panel
displays the default screen with the fixture’s DMX mode and DMX address.
DMX control is disabled when the control menus are active.
Control menus
This section explains the functions of the commands available in the FP7 control
menus.
DMX
DMX address
Sets the DMX start address of the fixture. The DMX address is 001 by default.
Mode
Selects the fixture’s DMX control mode. See ‘DMX control modes overview’ on page
31.