GLP Fusion Par FP7, Руководство пользователя

Страница: 21 / 40

German Light Products®
Fusion Par FP7 User Manual Rev. A 21
●
Inverse Square Law (Inv Sq) gives coarser control at low light levels and finer control
at high light levels.
The default setting is Linear .
D Speed
Lets you select from two dimming control speed settings:
●
Fast (the default setting) lets you make fast changes in intensity level. Slow changes
may be less even.
●
Smooth lets you make very smooth slow changes in intensity level. It will be
impossible to make very fast changes.
No matter which dimming control speed setting you select, you can still black out and
go to full intensity instantly using the Shutter channel.
PWM
Lets you select the PWM frequency of the fixture’s LEDs to reduce problems with flicker
when using video or TV cameras.
Mic
Enables the FP7’s audio trigger functionality. This lets you set fixtures to automatically
run a light show in sync with a music beat or other audio source.
Mic Sens
Lets you adjust the sensitivity of the audio trigger microphone. Three sensitivity levels
are available: Normal (the default setting), High and Low .
To set up microphone sensitivity, set Mic to On, set Mic Sens to Normal and play music
at a typical level.
If the fixture does not react at all or does not change lighting effects correctly in time
with the music beat, try increasing sensitivity to
High . If this does not help, try reducing
microphone sensitivity to Low . If the audio level is extremely low or extremely high, you
may need to move the fixture relative to the audio source.
Display
Gives three options for the control panel display:
●
Shutoff sets the fixture to remain on constantly ( Shutoff set to Off , the default setting)
or go into sleep mode after a period that you can select.
●
Blink sets the fixture to flash if the fixture detects an error.
●
Flip D rotates the display 180° for easier viewing if the fixture is installed head-down.
Temp U
Lets you display all temperatures in Celsius (the default setting) or Fahrenheit.
Lock
Lets you set a password for access to the control menus to prevent unwanted
tampering.