
Please note that these specifications apply to the Junior Analogue Addressable panel, 1 or 2 loop models,
equipped with a 2.4 Amp power supply @ 28.5V DC nominal.
Weight
Including sealed lead acid batteries:
2 x 12 V 7 AH - 7.0 Kg
Operating temperature
-5ºC to + 40ºC
Relative Humidity
85% (non-condensing)
Conventional Sounder Circuits
2 individually programmed. Both circuits current limited and monitored
for both open and short circuit fault conditions.
10k Ohm E.O.L. resistors are used.
Maximum current rating per circuit 400 mA.
Auxiliary Relay Outputs
2 voltage free changeover relay outputs used for fire indication.
1 voltage free relay output for fault indication. Remains energised
(normally closed) under normal condition and de-energises when any
fault condition appears on the system.
Maximum current rating for each relay contact 1A @ 50 V AC/DC resistive.
Sensor / Loop Circuits
1 loop model.
Max. number of devices per loop: 125
Supports analogue addressable devices over a 2 wire combined power
and digital data transmission loop.
Maximum Loop current :275 mA
Loop short circuit (trip) current: 900 mA
Maximum recommended loop length is 1 km with 1.5 mm2 wire cross-
section. Maximum cable capacitance 120 pF/m.
Minimum cable cross-section: 0.5 mm2
Maximum cable cross-section: 2.5 mm2
Power Supply and Charger
Primary Supply
230 V +10% / -15% V AC.
Input Operating Voltage
4 Amp - Surge protected (slow blow)
20 mm HRC
Mains electrical fuse
Fuse located on electrical mains connector TB, placed above the PSU
inside the box.
Empty: 1.6 Kg
WARNING:
In case of a short circuit or interruption of the analogue detection loop, only a
maximum of 32 detectors or call points (per loop) can be prevented, at any given time, of
transmitting a fire alarm. In order to assure compliance with this clause, loop isolators have to
be installed every 32 devices in the loop.
TECHNICAL SPECIFICATIONS
Manufacturers of Fire Detection Equipment
globalfire.pt
INSTALLATION & COMMISSIONING MANUAL - V1. 03/2015
JUNIOR V4-L
- FIRE ALARM CONTROL PANEL