Global JUNIOR V4-L Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 70

Global JUNIOR V4-L Скачать руководство пользователя страница 6

INTRODUCTION

This document covers the installation and commissioning of a JUNIOR fire alarm panel. This document is intended
for use by a competent, qualified, fire alarm installation engineer.

The JUNIOR fire alarm system should be tailored to the building requirements. The complete system should be
designed to meet all applicable regulations. The installation must then be performed in accordance with the
system design. This manual not only clarifies the components and connections during installation but will also
assist in commissioning and maintenance.

This manual covers the installation and commissioning of a complete system.

ELECTRO-STATIC SENSITIVE DEVICES (ESD)
TAKE SUITABLE ESD PRECAUTIONS WHEN REMOVING OR
INSTALLING PRINTED CIRCUIT BOARDS.

JUNIOR FIRE ALARM PANEL - KEY FEATURES

   Single loop panel - Expandable up to 2 loops.
   Supports connection to Mini-repeater via RS485, Fibre-Optic or TCP/IP
   125 device addresses per loop
   Up to96 VULCAN (addressable) ultra low current base sounders (32 address limit)
   32 individually programmable sounder addresses
   Full SAM & MAM support - Wizmart & GFE protocol only
   2 Fire output relays (change-over) and 1 Fault relay (nc - opens on fault)
   2 conventional alarm outputs (Individually programmable)
   Both detection loops monitored for integrity
   384 fully programmable zones
   512 fully programmable sounder groups
   512 I/O groups
   Event log (rolling, 2000 entries)
   Available in Apollo, GFE or Wizmart Protocol versions (Hochiki pending)
   Compatible with all our own low cost ancillary modules
   Backlit LCD display with 4 rows of 40 characters
   Programming by integrated keypad or Loader PC software (Juno Net Loader Version 2.12)
   Multiple language support (menu selectable)
   Integrated 16 zone LED fire zone indication

This manual has been written for panel software revision 3.09.

Newer versions of panel software will be similar but some details may differ.

OVERVIEW

All PCBs contain Electrostatic Sensitive Devices.

Take suitable ESD (Electrostatic Discharge) precautions when removing

or installing printed circuit boards (PCBs).

Manufacturers of Fire Detection Equipment

globalfire.pt

INSTALLATION & COMMISSIONING MANUAL - V1. 03/2015

JUNIOR V4-L

- FIRE ALARM CONTROL PANEL

«
...
4
5
6
7
8
...
»

Содержание JUNIOR V4-L







































































Отзывы:

Нет отзывов