PART THREE - OPERATION
SECTION 1 - USER INTERFACE
Rev. 1-201
Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN)
33
☞
NOTE:
When the analyzer returns to its normal MEASURE
screen mode, the appearing readout is always the
version last selected. Note that the 8 separate sen-
sor readouts show the “SENSOR A,” “SENSOR B,”
etc. factory-default notations on their top lines, il-
lustrating the notation feature. To create your own
notation, refer to PART THREE, Section 4.2, sub-
heading “ENTER NOTE (top line of MEASURE
screen).”
Also, the lower-right “X-Y” readout is an example of
a calculated measurement. The analyzer can also
calculate and display other measurements. See
PART THREE, Section 4.3 for details.
When the measured value is beyond the analyzer measur-
ing range, a series of “ + ” or “ - ” screen symbols appear,
respectively indicating that the value is above or below
range.
