PART THREE - OPERATION
SECTION 1 - USER INTERFACE
Model F53 Flow Monitor/Totalizer (universal-mount 1/2 DIN)
Rev. 1-201
32
1.3 MEASURE Screen
(normal display mode)
4.
Õ
Õ
and
Ö
Ö
keys:
Depending on the type of displayed
screen, these keys do the following:
•
MEASURE Screens: Changes readout (in continuous
loop sequence) to show different measurements.
•
Menu Screens: These keys are non-functional.
•
Edit/Selection Screens: Moves cursor left or right to
select digit for adjustment with
×
×
and
Ø
Ø
keys
.
5.
×
×
and
Ø
Ø
keys:
Depending on the type of displayed
screen, these keys do the following:
•
MEASURE Screens: Changes the bottom auxiliary
display line, shown in reverse video, between
measured Output 1 and Output 2 values (in mA).
•
Menu Screens: Moves reverse video cursor up or
down respectively to select a displayed line item.
•
Edit/Selection Screens: Adjusts selected digit value
up or down, or moves up or down between choices.
(The longer key is pressed, the faster value changes.)
The MEASURE screen is normally displayed. Pressing the
MENU key
temporarily replaces the MEASURE screen with
the “MAIN MENU” branch selection screen. Using the key-
pad, you can then display other screens to calibrate,
configure or test the analyzer.
If the keypad is not used
within 30 minutes, except during calibration and while
using specific analyzer test/maintenance functions, the
display will automatically return to the MEASURE
screen.
To display the MEASURE screen at any time, press
the
MENU key
once and then the
ESC key
once.
The MEASURE screen can show up to seventeen different
readout versions. To select between them, in continuous
loop sequence, press the
Ö
Ö
or
Õ
Õ
key
. These few
MEASURE screen examples illustrate this feature:
Ö
Ö
Ö
