GILES GGF Series Скачать руководство пользователя

Страница: 10 / 96

Model: GGF-400, GGF-720

Introduction

THANK YOU

for purchasing the

Giles Model GGF Series Gas Fryer

, manufactured by

GILES Food Service Equipment;

Montgomery, Alabama (USA), hereafter referred to as "Giles". Every unit is thoroughly inspected and tested prior

to shipment in efforts to ensure that it will operate flawlessly when installed. With proper care and maintenance

the appliance will provide years of trouble-free service.
To help protect your investment in this state-of-the-art cooking equipment, we recommend that you take a few

moments to become familiar with the procedures for installation, operation, cleaning, and maintenance contained

in this Manual. Adherence to the recommended procedures will minimize the potential for costly “downtime” and

future repair expense. Please retain this manual for future reference.

NOTE: Due to continuing improvements and product enhancements, some of the illustrations shown in this manual might

not exactly depict current models.

Introduction

1.1

Construction

Constructed of 18 and 20 Ga. 430 Stainless Steel.

Computer Controller

- Accurately controls cooking oil temperature and cooking time. Provides for up to fifty (50)

programmable menu item cooking presets. Monitors fryer status; displays operational instructions, warnings and

errors (

DRAIN OPEN

LOW OIL LEVEL

MAX. ELEMENT TEMP

, etc). Features

BOIL-OUT

program,

COOL MODE

FORCE FILTER

control, available password protection, multiple languages, and enhanced safety.

Dual Burner system

(Model GGF-720 only)

- Unique dual burner system delivers maximum BTU’s when needed,

while saving energy during light load cooking and idle periods.

Automatic Basket Lift

- Automatically lowers product when cook cycle is started ... lifts cooked product from hot oil

at the conclusion of the cook cycle.

Built-in Oil Filtration System

- Completely self-contained system helps to extend the life of cooking oil. Features

1/2 HP pump; designed to perform a filter cycle within approximately five (5) minutes.

Push-To-Start Feature -

After any power interruption, the User must press a

[START]

key to power-up the

appliance. This feature will comply with code requirements in some jurisdictions.

1.2

Standard Features

1.3

Optional Features

Filter Screen Media [purchased separately]

- Stainless steel micro-mesh, cleanable, filter screen used as a direct

replacement for Filter Paper. Reusable and durable; with proper care can last for many months. Helps to reduce

cost of operation and minimize the waste stream.

Order Item Number: 41014

Содержание GGF Series

































































































Результаты поиска

Содержание GGF Series

Отзывы:

Похожие инструкции для GGF Series

Бренды по названию

Популярные бренды

GILES GGF Series, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание GGF Series

Отзывы:

Похожие инструкции для GGF Series

Бренды по названию

Популярные бренды