Distributor Contacts
H-901MT/TD-901MT
Owner’s Guide
PET DRYER
Producer : Shanghai AEOLUS International Trading Co., Ltd.
Address : Floor 5, Building 6, No.675 Zhujin Road,
Songjiang District, Shanghai, 201615, China
Manufacturer : Yuyao Tongzhuo Electric Appliance Manufacturing Co., Ltd.
Address : No. 20 Zhu Shan Qiao Industrial Zone, Yuyao, Ningbo, China
Tested according to : IEC 60335 2 23:2003 (5. edition) (incl. Corr.2:2008) + A1:2008
IEC 60335 1:2001 (4. edition) (incl. Corr.1:2002) +A1:2004 (incl. Corr.1:2005)+
A2:2006 (incl. Corr.1:2006)
And Japanese deviation
New Legend
xtraordinary Blow Force
utstanding Durability and Sturdiness
ong Lasting Carbon Brush &Motor
nbeatable Single Motor Dryer
uperb Noise Control Technique
H-901MT/TD-901MT Presented by AEOLUS
The Newest Generation of AEOLUS
Family,
MANGO
1.
2.
5.
6.
3.
4.
Put all
the
parts
back
in
reverse
order.
Carbon Br
ush
Remove the
retaining screws
on
front cap by cross
screwdriver in
arrow direction, and open the front
cap.
Wall-mount
ing Brac
ket
Fix the retaining screws in broken line
showed in
the picture;
examine the
strength
and stability after works done.
The wall which you want to attach the bracket
to must be a solid wall which could bear
weight loading!
Remove these three screws which
fixing the motor bracket
one by
one.
Put the new brushes in, and tighten the
brass clip with nipper pliers.
Press the clip down on the connectors of
the wires to motor, unplug the wires and
remove the front cap.
Lift the little iron panel up with flathead
screwdriver, open the brass clip which
holding the motor wire to remove
the old
carbon brushes.
Twist the little iron to a certain angle to
fix the carbon brush brass rear cap.
Groomers Thir
d Ar
m
1.
2.
Dryer S
tand
1.
2.
Fix the nozzle with the metal clamp.
Slide the latch to fix the
dryer in showed direction.
Slide the dryer into position
of the bracket in arrow
direction.
※
Th
e po
we
r s
uppl
y m
us
t be
c
ut
off
be
fore
c
ha
ngi
ng
c
arbo
n br
us
he
s.
