GILES GGF Series Скачать руководство пользователя

Страница: 6 / 96

Safety

Model: GGF-400, GGF-720

Safety

Safety Overview:

Indicates an imminently hazardous situation which, if not avoided, will result in serious personal injury, even

death.

Indicates a potentially hazardous situation which, if not avoided, could result in serious injury, even death.

Indicates a potentially hazardous situation which, if not avoided, may result in minor to moderate injury. This

notification is also used as an alert to unsafe practices.

If used without the safety alert symbol, indicates a potentially hazardous situation which, if not avoided, may

result in equipment and/or property damage, and may void the factory warranty.

NOTE or IMPORTANT!

Identifies suggested, recommended, or other important information.

The instructions contained in this manual have been prepared to aid in learning the proper procedures for installing,

operating and servicing

Giles Model GGF Series Gas Fryer

Throughout the manual, safety precautions are identified by a hazard alert symbol and key words such as

DANGER,

WARNING

CAUTION

. Alert information precedes the tasks to which it applies. Suggested, recommended, or

other noteworthy information is identified as

NOTES

, or will be noted as

IMPORTANT!

. Additionally, certain words

are used to indicate a specific meaning, or to add emphasis as follows:

Shall:

understood to be mandatory.

Should:

understood to be advisory.

May:

understood to be permissive.

Will:

indicates a future event or condition to occur.

Hazard Alert Symbols

are used in conjunction with key words, such as

DANGER, WARNING

, or

CAUTION,

to alert users of potential personal injury hazards and/or poor operating practices. These will

immediately precede precautionary measures pertaining to avoiding such hazards or practices. Adhere to all

information following these symbols to avoid possible injury, or even death. Failure to do so may also void the

factory warranty.

This product can expose Users to chemicals including lead, nickel, cobalt, aluminum, cadmium, brass,

carbon, copper or BPA which are known in the state of California to cause cancer, birth defects and other

reproductive harm. For more information go to:

www.p65warnings.ca.gov

Содержание GGF Series

































































































Результаты поиска

Содержание GGF Series

Отзывы:

Похожие инструкции для GGF Series

Бренды по названию

Популярные бренды

GILES GGF Series, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание GGF Series

Отзывы:

Похожие инструкции для GGF Series

Бренды по названию

Популярные бренды