GILES GGF Series Скачать руководство пользователя

Страница: 19 / 96

Installation

GGF-400, GGF-720

2.7.1

Typical Gas Supply Line Connection

1/2” Flexible

Gas Line

Secondary In-

Line Regulator

[May not be

required, see

below]

To Fryer

Regulator

Customer supplied

Gas Supply Shut-

Off Valve

IMPORTANT!

•

Installation must comply with local code, or in the absence of local code, with the National Fuel Gas Code,

ANSI Z223.1/NFPA 54 [in Canada, Natural Gas and Propane Installation Code, CSA B149.1] including:

• The appliance must be disconnected from the incoming gas supply line at the main shut-off valve, during any

testing of the piping at test pressures

in excess of 1/2 psi (3.5kPa).

• The appliance must be isolated from the incoming gas supply line by closing the fryer Gas Shutoff Valve, during

any testing of the piping at test pressures

equal to or less than 1/2 psi (3.5kPa).

1. Check pressure of the incoming gas supply and compare to

Table 2.5.2.

If necessary install a secondary pressure

regulator on the supply line to regulate supply pressure to a maximum of 13.85” W.C. [3.45 kPa].

2. Install an appropriate Quick-Disconnect fitting on the gas line.
3. Connect an approved 1/2” flexible gas line

(not provided)

between the supply line disconnect and the Fryer gas

regulator located on the rear of the unit.

Note:

The flexible gas line should be long enough to allow for the Fryer to be moved away from wall for any

servicing and cleaning.

WHEN TIGHTENED, CHECK ALL CONECTIONS FOR LEAKS USING A SUITABLE METHOD!

Continued on Next Page

Quick Disconnect

Содержание GGF Series

































































































Результаты поиска

Содержание GGF Series

Отзывы:

Похожие инструкции для GGF Series

Бренды по названию

Популярные бренды

GILES GGF Series, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание GGF Series

Отзывы:

Похожие инструкции для GGF Series

Бренды по названию

Популярные бренды