GILES GGF Series, Руководство по эксплуатации и обслуживанию

Страница: 72 / 96

64
Cleaning
Model: GGF-400, GGF-720
6.1. Boil-Out Procedure - continued
Continued on Next Page
9. Disconnect and remove Filter Pan from fryer.
10. Position a suitable heat resistant catch container
⑥
(not
provided) beneath the fryer drain.
11. Slowly turn the Drain Valve Handle
⑦
to the [OPEN] position,
allowing boil-out solution to drain from pot. If using catch container, carefully monitor and empty as needed.
As solution drains, clean heating elements and pot surfaces, by scrubbing with the provided brushes.
5. Place the Power Switch
③
in the [ON] position.
6. Place the Selector Switch
④
in [COOK] position.
7. After controller powers-up and the alarm sounds,
press [START] key to enter PREHEAT ; amber HEAT
light on control panel turns ON , solution begins
heating . Note Upper Display reads “PRESS [BOIL] -
GO TO BOIL-OUT” . Press the [BOIL] key
⑤
to place
fryer into BOIL OUT mode. Temp setting changes to
200°F (93°C) and time begins countdown from 30
mins . Allow the boil out cycle to run completely.
These values can be changed in User Settings, Section 5.1.7 .
8. When boil out cycle time expires, a “ DONE COOKING” alarm
sounds; place both Selector Switch
④
and Power Switch
③
in the [OFF] position.
6
4
3
5
NOTE:
As a safeguard, when the boil out cycle
ends, the controller temperature
setpoint automatically changes to 50F.
Before cooking activities can resume, a
menu item preset must be re-selected,
or temperature setpoint must be re-
entered manually.
IMPORTANT!!
DO NOT drain boil-out solution into the filter pan or run through
filter pump! It is corrosive and can cause damage to
components. Equipment failures and/or malfunctions caused in
this manner, are not be covered by the factory warranty
The container used for this step should be
heat resistant up to 300°F (148°C). Plastic is
generally not safe, as it may soften and break open. A leak-
proof metal container should be used. Failure to comply with
this caution may result in personal injury.
If a floor drain is available in a suitable nearby location, slowly
draining solution onto floor and squeegeeing the liquid into the
drain is an acceptable alternative (may require a helper) .
7